Skip to main content

Briefing Map

Note: The Situation Map has been deprecated as a map standard. The Operations map should be used as an acceptable substitute for task book purposes.

Product Description

The Briefing Map is displayed in the briefing area and used during operational briefings. It is a simplified, large-format map of the incident area that is used to discuss work assignments and other operational details. The briefing map can be printed or displayed digitally using a projector. Sometimes this map is referred to as a Briefing Area Map (BAM).

Target Audience

Incident personnel attending the operational briefing.

Guidelines

  • Standard Incident Command System (ICS) symbology. Symbols should be enlarged as necessary for visibility.
  • Simple fonts and symbols for non-ICS features such as roads at exaggerated sizes, large enough to be read from the back of the briefing area.
  • Simplified base map to enable clear communication.
  • Extent and map content is based on operations occurring on the fire, the Situation Unit Leader (SITL) will provide guidance.
  • Printed or projected as large as possible to serve a large crowd and to be visible from a distance.

Standard Elements

All map products produced should include the STANDL-SGD cartographic elements.

Data

  • Wildfire Daily Fire Perimeter (Polygon) with Contained and Uncontained Perimeter Lines.
  • Event Points (including, but not limited to: Camps, Drop Points, Helispots, Helibase, and Incident Command Post).
  • Event Lines (including, but not limited to: Planned and Completed Lines).
  • Assignment (Division, Branch, Zone) breaks and labels.
  • Major transportation routes to and from the incident.
  • Other Situation Unit Leader (SITL)-requested data (including, but not limited to: Administrative Boundaries, Land Ownership / Jurisdiction, Special Management Areas, Utilities).

Examples

These are examples from actual incidents and may include non-standard elements.

Also note that examples use the standard symbols at the time of their creation and may not reflect the current GeoOps symbology. Map elements, incident features, and composition remain consistent across these visual changes.

  1. 2021 Caldor Fire
  2. 2022 Hermits Peak Fire
  3. 2022 Fish Fire
  4. 2010 Wrangler Fire
  5. 2016 Beaver Creek Fire
  6. 2017 Boundary Fire

 

Last Modified / Reviewed:

Print PDF

NWCG Latest Announcements

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002

2024 Wildland Fire Emergency Medical Service Awards

Date: May 22, 2025
Questions?  Please contact:
Emergency Medical Committee

The NWCG Emergency Medical Committee (EMC) is proud to announce the recipients of the 2024 Wildland Fire Emergency Medical Service Awards. Each year, EMC recognizes individuals and groups who have demonstrated exceptional actions or accomplishments that go above and beyond their normal mission or job duties.

Congratulations to all the awardees and nominees. Through leadership and initiative, they have made significant contributions to the safety and well-being of the wildland fire community. These honors are well deserved.

References:

2024 Wildland Fire EMS Awards

NWCG Emergency Medical Committee

NWCG Welcomes the Incident Management Teams Association as an Associate Member

Date: May 21, 2025
Questions?  Please contact:
https://www.nwcg.gov/contact-us

The NWCG Executive Board is honored to announce that the Incident Management Teams Association (IMTA) has joined the National Wildfire Coordinating Group as an associate member.

IMTA is a dedicated group of incident management professionals committed to enhancing the profession by promoting standards and fostering collaboration across federal, state, local, Tribal, and private sector partners throughout all phases of incident management.

“Joining NWCG aligns with our mission to elevate incident management professionals nationwide,” said Dr. Randal Collins, President of IMTA. “This is a proud moment for all of us committed to advancing public safety.”

References:

Incident Management Teams Association

National Wildfire Coordinating Group