Skip to main content

Retardant and Water Drop Safety

 

Retardant (jell, foam), paracargo, and water drops on a fire are routine events. However, there are risks associated with these missions that can pose serious threats to personnel and equipment. Consider the following for all drops you are coordinating:

  • Be aware of the location and flight patterns (final approach, drop zone, exit) of aircraft during drop operations.
  • Ensure you have positive contact with the pilot before the drop.
    • Clear all persons, vehicles, and animals from the danger zone prior to the arrival of the aircraft.
    • Beware of streamers or parachutes that do not open.
  • Personnel can be injured by the impact of material dropped by aircraft. Clear personnel out of the target area before the drop is conducted. If an individual is caught unaware in a drop zone:
    • Hold hand tools away from your body.
    • Lie face down with hardhat in place and head toward the oncoming aircraft.
    • Grasp something firm to prevent being carried or rolled about by dropped liquid.
    • Do not run unless escape is guaranteed.
    • Get clear of dead snags and tree tops.
    • Be aware of rolling debris below the drop site in steep terrain.
  • Use caution when working in an area covered by retardant. Surfaces are slippery.
  • Wash the retardant off your skin as soon as possible to prevent irritation.

 

Category

Last Modified / Reviewed:


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

NWCG Latest Announcements

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508

WFSTAR 2025 Core Component Module Package and 2024 Fire Year in Review Now Available

Date: March 14, 2025
Questions?  Please contact:
Joe Schindel at mschindel@blm.gov
 

The 2025 Core Component Module Package for RT-130, Wildland Fire Safety Training Annual Refresher (WFSTAR) and the 2024 Fire Year in Review are now available on the NWCG website. The 2025 Core Component Module Package provides all content needed to deliver RT-130.

References:

2025 Core Component Module Package

2024 Fire Year in Review Module

NEW! NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053

Date: March 12, 2025
Contact: Wildland Urban Interface Mitigation Committee

The NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 provides mitigation practitioners at all experience levels with recommendations on the most effective and efficient ways to accomplish mitigation work in communities at risk to wildfire damage or destruction. The content in this guide was written in coordination with the NWCG Standards for Mitigation in the Wildland Urban Interface, PMS 052.

References:

NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 

Updated, NWCG Standards for Wildland Fire Module Operations, PMS 430

Date: March 11, 2025
Contact: Fire Use Subcommittee
Wildland Fire Module Unit

The NWCG Standards for Wildland Fire Module Operations, PMS 430 standardizes procedures and expectations for Wildland Fire Modules (WFMs). These standards are to be used by staff, supervisors, specialists, and technicians for planning, administering, and conducting WFM operations. These standards will also be used as a measure of WFM qualifications, capabilities, and expected performance, for both Type 1 and Type 2 WFMs.

References:

NWCG Standards for Wildland Fire Module Operations, PMS 430