Skip to main content

NWCG Positions

Positions Highlights

Position Catalog

NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1

History by Position

History by Year

Committee Assignments

Air Operations

Command

Dispatch

Finance/Administration

Logistics

Operations

Planning

Prescribed Fire

Prevention and Investigation

Alternative Pathways to NWCG Qualification

Planning

NWCG positions enable consistent and uniform performance by personnel mobilized by position under NIMS-ICS principles. The position catalog provides comprehensive information about each NWCG position, those for which NWCG establishes qualifications standards. Agency-specific positions such as those located in the Federal Wildland Fire Qualifications Supplement are not included in this catalog.

Positions denoted with an asterisk (*) use the established FEMA National Qualifications System all-hazard position as the baseline for the NWCG wildland fire position.

Note: Filter all IPDs using the IPD Status column to quickly see which ones are under review.

Position Title Position Code Functional Area Steward Key Stakeholders IPD Status ID IDQR
Assistant Area Commander, Planning ACPC Planning IPS Approved 29580 32929
Demobilization Unit Leader* DMOB Planning IPS Approved 29530 32926
Display Processor DPRO Planning IPS Approved 29531 32920
Documentation Unit Leader* DOCL Planning IPS Approved 29533 32923
Field Observer FOBS Planning IPS Approved 29534 32917
Fire Behavior Analyst FBAN Planning FBSC Incident Planning Subcommittee Approved 29535 33018
Fire Effects Monitor FEMO Planning FMC Incident Planning Subcommittee, Smoke Committee Approved 29536 33024
Geographic Information System Specialist* GISS Planning GSC Incident Planning Subcommittee Approved 29537 32791
Human Resource Specialist HRSP Planning HRSPU Incident Planning Subcommittee Approved 29612 32914
Incident Training Specialist TNSP Planning IPS Approved 29635 32889
Infrared Interpreter IRIN Planning GSC Incident Planning Subcommittee Approved 29616 32794
Interagency Resource Representative IARR Planning NCSC Incident Planning Subcommittee Approved 29613 32911
Long Term Fire Analyst LTAN Planning FBSC Incident Planning Subcommittee Approved 29617 33021
Planning Section Chief Complex PSCC Planning IPS Approved 36927 36934
Planning Section Chief Type 1* PSC1 Planning IPS Approved 29581 32908
Planning Section Chief Type 2* PSC2 Planning IPS Approved 29630 32904
Planning Section Chief Type 3* PSC3 Planning IPS Approved 29631 32901
Resources Unit Leader* RESL Planning IPS Approved 29632 32898
Situation Unit Leader* SITL Planning IPS Approved 29634 32892
Status/Check-In Recorder SCKN Planning IPS Approved 29633 32895
Strategic Operational Planner SOPL Planning FMC Fire Environment Committee, Incident Planning Subcommittee Approved 29582 32867
Displaying 1 - 21 of 21

USWDS Paragraph Bundles

Print PDF

NWCG Latest Announcements

ETC Equipment Bulletin: 25-003 Flame-Resistant Shirt Survey

Date: June 12, 2025
Questions?  Please contact:
Equipment Technology Committee

The U.S. Forest Service National Technology and Development Program (NTDP) is seeking input on the Forest Service-designed flame-resistant (FR) shirt, currently available through the National Interagency Support Cache system and FedMall.

NTDP is conducting a product review to improve future FR shirt designs. As part of this effort, a short survey is now open for federal employees who have worn any of three recent FR shirt models. Feedback will guide design improvements to better meet the needs of wildland firefighters.

To comply with the Paperwork Reduction Act, responses are limited to federal employees. The survey is open through September 12, 2025. 

References:

NWCG Alerts

ETC Equipment Bulletin: 25-003

NEW! S-130, Firefighter Training (Blended) Now Available

Date: June 10, 2025
If you have questions, please visit our FAQ page. 
If your question is not answered there, you can 
submit your question using our Contact Us form. 
 

The S-130, Firefighter Training (Blended), equips new wildland firefighters with essential skills through a mix of online learning and hands-on training. The course features a required online component and an instructor-led exercise, reinforcing online concepts with practical performance-based training.

The course builds competencies in wildland fire operations, safety, and equipment use, applicable across various operational environments. Both the online component and instructor-led field exercise must be completed to receive a certificate of completion. Students are required to finish the prerequisite S-190, Introduction to Wildland Fire Behavior, before enrolling in S-130, Firefighter Training (Blended).

References:

S-130, Firefighter Training (Blended)

S-190, Introduction to Wildland Fire Behavior

Wildland Fire Learning Portal

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002