Skip to main content

Hazard Tree – Identification

hazard-tree-identification-graphic.pngSome common tree deficiencies which contribute to potential felling hazards:

Weak Limbs: limbs of all sizes and species with decay evident cracking, loose, hung-up, or fire damaged limbs. Avoid working under overhead hazards.

Weak Tops: split/schoolmarm tops that could have weakened unions, fire weakened tops, rotten or dead tops.

Witches Broom: caused by mistletoe infection, limbs can grow very large and heavy (200+ lbs). Can contribute to uneven weight distribution.

Split Trunk: cracked trunk from frost, lightning, or wind. Visible evidence of advanced decay indicates serious weakness where the tree could fail. May increase wood fiber tension contributing to barber chair potential.

Stem Damage: caused by windfall, scarring, fire, machine, and animal damage, as well as heart rot diseases.

Cat Face:  look for enough solid wood to construct an effective undercut and back cut. Complexity increases when desired felling direction is different than that of the cat face.

Thick Sloughing Bark: usually found on dead trees. Loose bark, particularly on Douglas firs, can injure sawyers.

Butt and Stem Cankers: usually found on deciduous trees but can occur on Douglas fir and pine. The infected areas weaken the stem.

Fungal Fruiting Bodies or Conks: found on stems may indicate massive interior rot. Excessive resinosis (resin flow) also indicates heart or root diseases.

Heavy Tree Lean: look for any ground cracks around the base of the tree. May be caused by damaged roots or lifting root mats, shallow or wet soils. In some cases, the tree may have corrected itself which can be determined by looking for corrected top growth.

Root Condition: weakened roots may reduce felling control. Signs of decay or fungal conks on the roots, or fire weakened roots.

Species Consideration: consult local experts for species deficiencies particular to local areas. A good habit is to observe overall tree stand health wherever you’re working.

Felling a hazard tree requires accurate risk assessment and complexity analysis and demands the sawyer’s full situational awareness. Do not bypass hazard trees without taking some action such as felling or establishing a No-Work-Zone.

Discuss indicators of tree defects specific to your local area.

 

Category

Last Modified / Reviewed:


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

NWCG Latest Announcements

Updated NWCG Standards for Wildland Fire Resource Typing, PMS 200 Now Includes Off-Highway Vehicle Typing Standards

Date: May 13, 2025
Questions?  Please contact:
Mobile Fire Equipment Subcommittee 

The NWCG Standards for Wildland Fire Resource Typing, PMS 200 has been updated to include newly developed Off-Highway Vehicle (OHV) typing standards. These standards organize OHV information into logical categories and outline key safety requirements for occupants.

NWCG Standards for Wildland Fire Resource Typing, PMS 200 establishes minimum typing standards for aircraft, crews, and equipment used in national mobilization to wildland fire incidents. Typing designations are assigned based on measurable capability and performance criteria.

References:

NWCG Standards for Wildland Fire Resource Typing, PMS 200

NEW! S-204, Interpersonal and Critical Thinking Skills for Safety Officers Now Available

Date: May 12, 2025
Questions?  Please contact:
Risk Management Committee

The S-204, Interpersonal and Critical Thinking Skills for Safety Officers self-directed online course is now available! Developed through the Incident Performance and Training Modernization (IPTM) effort, this training supports individuals working towards Safety Officer, Field (SOFF) incident qualifications.

S-204, Interpersonal and Critical Thinking Skills for Safety Officers focuses on facilitating hazard mitigation conversations and building trust to influence safety-related decisions. Individuals can self-enroll through the Wildland Fire Learning Portal (WFLP).

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1.

References:

S-204, Interpersonal and Critical Thinking Skills for Safety Officers 

NWCG Safety Officer, Field (SOFF) Position Page

Wildland Fire Learning Portal

Great Basin Cache Upgrading to New Inventory System

Date: May 7, 2025
Questions?  Please contact:
Great Basin Cache
Phone: (208) 387-5104
Fax: (208) 387-5573

The Great Basin Cache (GBK) is transitioning to a new inventory system to better serve the wildland fire community. During this upgrade, GBK will be unable to process standard orders from Part 1: Fire Supplies and Equipment and Part 2: Publications between May 8-20, 2025, with exceptions made for emergency fire orders. Orders will be accepted through close of business May 7.

To browse the latest available items, please refer to the National Fire Equipment System (NFES) catalogs. 

References:

NWCG NFES Catalog-Part 1: Fire Supplies and Equipment, PMS 449-1

NWCG NFES Catalog-Part 2: Publications, PMS 449-2

NEW! Air Operations Summary (ICS 220 WF) Now Available

Date: May 2, 2025
Questions?  Please contact:
National Interagency Aviation Committee

The Air Operations Summary (ICS 220 WF) provides the Air Operations Branch with the number, type, location, and specific assignments of helicopters and air resources. The new ICS 220 WF also includes medical extraction capabilities and air resources tracking.

Understanding the capabilities of aviation assets is critical for effective medical and extraction responses. Coordination with the Medical Unit Leader is essential to ensure alignment and consistency between the ICS 220 WF and the Medical Plan (ICS 206 WF). 

References:

Air Operations Summary (ICS 220 WF)

National Interagency Aviation Committee

Incident Command System (ICS) Forms