Skip to main content

Hazard Tree – Situational Awareness

 

Snags are dead, standing trees without leaves or needles in the crowns and present a significant threat to forest worker safety. Snags may burn through more quickly than green trees and can fall without warning. 

Live, structurally compromised green trees weakened by insects, disease, weather, fire, and age can also fall without notice.

Sawyers and crews operate with increased risk from hazard trees during low visibility or night operations. Night saw operations should include discussions involving minimizing falling operations due to reduced visibility and the reduction of situational awareness of immediate surroundings.

Environmental conditions that increase risk from hazard trees:

  • Strong or gusty winds from storm cells.
  • Air operations - water or retardant drops, rotor wash from helicopters.
  • Steep slopes with rolling material.
  • Diseased or bug-killed areas (Mountain Pine Beetle).
  • Fire weakened timber.
  • Reduced visibility from smoke, fog, or darkness.

Things to consider when assessing the potential danger of hazard trees in an area:

  • Timbered areas that have been burning for an extended period.
  • High-risk tree species (those that are known for rot and shallow root systems) in the area.
  • Numerous downed trees or tree parts in the area.
  • Broken tops and dead limbs overhead or an accumulation of downed limbs around tree boles (stems).
  • Signs of tree decay including: cavities, splits, cracks, lack of needles, mechanical damage, missing bark, insect infestation, mushrooms, or fungus growing from tree.
  • Root damage from equipment, fire, or erosion.
  • Steep slopes for rolling debris, reduced personnel mobility, and more difficult size-up.
  • Weather forecast with high winds or wind impacting the tree canopy.

Identify mitigation measures to reduce risk from hazard trees:

  • Identify, communicate, establish, and monitor No-Work-Zones (NWZ) in all high-risk areas until the hazard has been mitigated.
  • Assign qualified sawyers and falling bosses based on the complexity of the hazard.
  • Consider ordering in higher complexity fallers in advance.
  • Use heavy equipment or explosives to avoid placing sawyers under hazards.
  • Plan quick and safe escape routes.
  • Minimize exposure time at the stump by employing efficient felling procedures.
  • Minimize impacts to the hazard tree from wedge pounding or other felling operations in the area.
  • Do not turn your back on a falling tree or known hazard.
  • Use lookouts to maintain secure felling areas. 
  • Discuss/practice medical evacuation procedures and accept risk accordingly.

 

Category


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

Share This Page on Social Media

Last Modified / Reviewed:

NWCG Latest Announcements

2024 Wildland Fire Emergency Medical Service Awards

Date: May 22, 2025
Questions?  Please contact:
Emergency Medical Committee

The NWCG Emergency Medical Committee (EMC) is proud to announce the recipients of the 2024 Wildland Fire Emergency Medical Service Awards. Each year, EMC recognizes individuals and groups who have demonstrated exceptional actions or accomplishments that go above and beyond their normal mission or job duties.

Congratulations to all the awardees and nominees. Through leadership and initiative, they have made significant contributions to the safety and well-being of the wildland fire community. These honors are well deserved.

References:

2024 Wildland Fire EMS Awards

NWCG Emergency Medical Committee

NWCG Welcomes the Incident Management Teams Association as an Associate Member

Date: May 21, 2025
Questions?  Please contact:
https://www.nwcg.gov/contact-us

The NWCG Executive Board is honored to announce that the Incident Management Teams Association (IMTA) has joined the National Wildfire Coordinating Group as an associate member.

IMTA is a dedicated group of incident management professionals committed to enhancing the profession by promoting standards and fostering collaboration across federal, state, local, Tribal, and private sector partners throughout all phases of incident management.

“Joining NWCG aligns with our mission to elevate incident management professionals nationwide,” said Dr. Randal Collins, President of IMTA. “This is a proud moment for all of us committed to advancing public safety.”

References:

Incident Management Teams Association

National Wildfire Coordinating Group

Updated NWCG Guide for Wildland Fire Modules, PMS 431

Date: May 14, 2025
Questions?  Please contact:
Fire Use Subcommittee

The updated NWCG Guide for Wildland Fire Modules, PMS 431 serves as a supplemental resource for wildland fire module operations, providing information frequently used in the field.

PMS 431 defines the organizational structure, staffing, and qualifications for Type 1 and Type 2 Wildland Fire Modules, outlining their roles in wildland fire suppression, prescribed fire, and resource management. The NWCG Guide for Wildland Fire Modules, PMS 431, should be used in conjunction with the NWCG Standards for Wildland Fire Module Operations, PMS 430.

References:

NWCG Guide for Wildland Fire Modules, PMS 431

NWCG Standards for Wildland Fire Module Operations, PMS 430

Updated NWCG Standards for Wildland Fire Resource Typing, PMS 200 Now Includes Off-Highway Vehicle Typing Standards

Date: May 13, 2025
Questions?  Please contact:
Mobile Fire Equipment Subcommittee 

The NWCG Standards for Wildland Fire Resource Typing, PMS 200 has been updated to include newly developed Off-Highway Vehicle (OHV) typing standards. These standards organize OHV information into logical categories and outline key safety requirements for occupants.

NWCG Standards for Wildland Fire Resource Typing, PMS 200 establishes minimum typing standards for aircraft, crews, and equipment used in national mobilization to wildland fire incidents. Typing designations are assigned based on measurable capability and performance criteria.

References:

NWCG Standards for Wildland Fire Resource Typing, PMS 200