Skip to main content

After Action Review (AAR) – Part 1

How to Conduct an Effective After Action Review (AAR)

An AAR is a professional discussion of an event. The objective is to identify successes and failures. It is a tool that leaders, teams, crews, and units can use to get maximum learning benefit from every incident or project. It is essential for wildland firefighters to learn from mistakes and to capitalize on successes. It is considered a valuable tool in high-risk professions, where the smallest mistakes can lead to disastrous results. An AAR is not a critique and not a forum to assign blame. It is an open, honest, and professional discussion for purposes of improvement.

Once you (the leader/facilitator) have demonstrated that the AAR works and that it will be part of your team's standard operating procedures, the discussion will become more open. Finding out what they did is not nearly as important as why they did it. Good active listening skills are essential. Do not immediately try to solve or correct the issue, but let it play out. Try to get to the root of the issue. The leader must be a part of the AAR and will have to accept criticism. This is important because the team will be looking for affirmation of the AAR process.

  •  An AAR is performed as immediately after the event as possible by the personnel involved.
  • The leader’s role is to ensure skilled facilitation of the AAR.
  • Reinforce that respectful disagreement is okay. Keep focused on the what, not the who.
  • Make sure everyone participates.
  • Pay attention to time.
  • Establish clear ground rules: encourage candor and openness, all participants have equal ownership, focus on improving performance, and keep all discussions confidential.
  • End the AAR on a positive note.

1. What was planned?

Review the intent of the mission
Desired end state (what does right look like).

2. What actually happened?

Establish the facts
Pool multiple perspectives to build a shared picture of what happened.

3. Why did it happen?

Analysis of cause and effect
Provide progressive refinement for drawing out explanations of what occurred.

4. What are we going to do next time?

Correct weaknesses and sustain strengths
Focus on items you can fix, rather than external forces outside of your control.

 

Also see: AAR part 2

 

Last Modified / Reviewed:


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

NWCG Latest Announcements

Updated NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

Date: April 23, 2025
Questions?  Please contact:
Interagency Fire Unmanned Aircraft Systems Subcommittee

The NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515 standardizes processes and procedures for the interagency use of Unmanned Aircraft Systems (UAS), including pilot inspections and approvals. This updated publication provides the aviation community with standards to ensure UAS are used safely, effectively, and efficiently in support of fire management goals and objectives.

References:

NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

NWCG National Interagency Aviation Committee

ETC Bulletin 25-001: Retrofitted Hot/Cold Beverage Kits - 2025 Field Season

Date: April 16, 2025
Questions?  Please contact:
Equipment Technology Committee

Due to spout failures and the associated risk of burn injuries, manufacturers have retrofitted the Hot/Cold Beverage Kits using a heat-shrinking band to secure the black spout at the insertion site. The updated kits feature a fluorescent label on each full kit assembly for easy identification. Catering units are encouraged to confirm the clear heat-shrinking bands are intact around each spout before filling.

ETC Bulletin 24-001 regarding Hot/Cold Beverage Kits has been archived and replaced by ETC Bulletin 25-001 for the 2025 season.

References:

NWCG Alerts

ETC-EB-25-001 Retrofitted Hot/Cold Beverage Kits

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog