Skip to main content

6MFS

6MFS Committee

All 6MFS Topics

6MFS Calendar

Aviation

Airtankers

Felling Safety

Fire Communication

Firefighter Health & First Aid

Leadership

Misc Fireline Hazards

Operational Engagement

This Day in History

Vehicles - Roads

Weather - Fire Behavior

Week of Remembrance

Instructions and Assignments Not Clear

 

The Incident Command System (ICS) is used to provide uniform chain of command on all incidents. This Watch Out shows an engine crew working in a counterproductive manner, without clear instructions towards an expected outcome.

6. Instructions and assignments not clear. One firefighter uses a drip torch to ignite grasses on the right side of the image. Two firefighters spray water from a yellow fire engine onto burning grass on the left side of the image.

6. Instructions and assignments not clear.
 

Read about all 18 Watch Out Situations.

Every firefighter will give and receive briefings at some point on the job. Briefings are an effective way to disseminate information that can make the firefighter’s job safer and easier. When giving a briefing, it is important to keep the following questions in mind and remain perceptive to how the audience is receiving the information:

  • Did you use the Incident Response Pocket Guide (IRPG), PMS 461, standards briefing checklist?
  • Did they ask questions? Do you get empty stares? What feedback are you looking for to ensure they understand you?
  • Talk with coworkers about what it is like giving a briefing.
  • Did they take notes? What kind of information would you like to see people write down?
  • Did they repeat information back? What other ways can you identify that your briefing is understood?
  • Did you give all the necessary information? How will you ensure that you covered everything necessary?
    • Task
    • Location
    • Communications
    • Hazards
    • Who, when, etc.

It is also important for the firefighter who is receiving instructions to be mindful of the following during the briefing:

  • Did you really listen? What do you do to make yourself pay attention to everything being said?
  • Did you understand the assignment, location, and the nature and location of hazards? Do you expect to figure it out for yourself when you get out there or do you step forward and ask questions?
  • You must know the location of the assignment and:
    • What is to be done.
    • Who you are to report to and how often to report.
    • Expectations for completing the assignment.
    • Hazards.
    • Communication plan frequencies.
    • Weather and fire behavior.
    • Status of adjoining forces.

 

Category
Fire Communication
References
10 Standard Firefighting Orders, PMS 110
18 Watch Out Situations, PMS 118
10 and 18 Poster, PMS 110-18
Incident Response Pocket Guide (IRPG), PMS 461, standards briefing checklist.

6MFS Suggestion Form


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

Last Modified / Reviewed:

Print PDF

NWCG Latest Announcements

ETC Equipment Bulletin: 25-003 Flame-Resistant Shirt Survey

Date: June 12, 2025
Questions?  Please contact:
Equipment Technology Committee

The U.S. Forest Service National Technology and Development Program (NTDP) is seeking input on the Forest Service-designed flame-resistant (FR) shirt, currently available through the National Interagency Support Cache system and FedMall.

NTDP is conducting a product review to improve future FR shirt designs. As part of this effort, a short survey is now open for federal employees who have worn any of three recent FR shirt models. Feedback will guide design improvements to better meet the needs of wildland firefighters.

To comply with the Paperwork Reduction Act, responses are limited to federal employees. The survey is open through September 12, 2025. 

References:

NWCG Alerts

ETC Equipment Bulletin: 25-003

NEW! S-130, Firefighter Training (Blended) Now Available

Date: June 10, 2025
If you have questions, please visit our FAQ page. 
If your question is not answered there, you can 
submit your question using our Contact Us form. 
 

The S-130, Firefighter Training (Blended), equips new wildland firefighters with essential skills through a mix of online learning and hands-on training. The course features a required online component and an instructor-led exercise, reinforcing online concepts with practical performance-based training.

The course builds competencies in wildland fire operations, safety, and equipment use, applicable across various operational environments. Both the online component and instructor-led field exercise must be completed to receive a certificate of completion. Students are required to finish the prerequisite S-190, Introduction to Wildland Fire Behavior, before enrolling in S-130, Firefighter Training (Blended).

References:

S-130, Firefighter Training (Blended)

S-190, Introduction to Wildland Fire Behavior

Wildland Fire Learning Portal

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002