Skip to main content

No Communication Link with Crewmembers or Supervisor

Watch Out Situation #7 is a danger that must be mitigated by maintaining good communications while working on fires. Firefighters must constantly ask themselves the following questions as situations change on the fireline:

7. No communication link with crewmembers or supervisor. Firefighters and a white fire engine are all located apart from one another in a heavily timbered area, with trees and distance between them.
7. No communication link with crewmembers or supervisor. 
Known radio frequencies and channels enable instant communication within and between firefighting resources. This Watch Out shows a crew physically separated without any obvious method for communication among crew members or their supervisor. 
Read about all 18 Watch Out Situations.

Can communication(s) be established?

  • Talk about how communications are set up on fires, including the variables that must be considered.
  • Review situations where communications were a problem. Discuss what was done to fix the problem.
  • Ask yourself, “Do we need a repeater setup or can an experienced firefighter act as a human repeater?”

Is the communication triangle complete?

  • Review the communication triangle: speaker, message, and audience. Discuss where it comes up in the 10 Standard Fire Orders and the 18 Watch Out Situations.
  • Discuss ways that firefighters can maintain the communication triangle on the fireline.

How can we reduce the risks?

  • If the situation is complex, wait until communications are in place.
  • Talk about the fires where crews had to leave the line, did not go out on the line, or something negative happened because communications were inadequate. Discuss what was done to establish communications in these situations.
  • Discuss scenarios in which communications could be disrupted. What are some possible solutions?

 

Last Modified / Reviewed:


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

NWCG Latest Announcements

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508

WFSTAR 2025 Core Component Module Package and 2024 Fire Year in Review Now Available

Date: March 14, 2025
Questions?  Please contact:
Joe Schindel at mschindel@blm.gov
 

The 2025 Core Component Module Package for RT-130, Wildland Fire Safety Training Annual Refresher (WFSTAR) and the 2024 Fire Year in Review are now available on the NWCG website. The 2025 Core Component Module Package provides all content needed to deliver RT-130.

References:

2025 Core Component Module Package

2024 Fire Year in Review Module

NEW! NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053

Date: March 12, 2025
Contact: Wildland Urban Interface Mitigation Committee

The NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 provides mitigation practitioners at all experience levels with recommendations on the most effective and efficient ways to accomplish mitigation work in communities at risk to wildfire damage or destruction. The content in this guide was written in coordination with the NWCG Standards for Mitigation in the Wildland Urban Interface, PMS 052.

References:

NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 

Updated, NWCG Standards for Wildland Fire Module Operations, PMS 430

Date: March 11, 2025
Contact: Fire Use Subcommittee
Wildland Fire Module Unit

The NWCG Standards for Wildland Fire Module Operations, PMS 430 standardizes procedures and expectations for Wildland Fire Modules (WFMs). These standards are to be used by staff, supervisors, specialists, and technicians for planning, administering, and conducting WFM operations. These standards will also be used as a measure of WFM qualifications, capabilities, and expected performance, for both Type 1 and Type 2 WFMs.

References:

NWCG Standards for Wildland Fire Module Operations, PMS 430