Skip to main content

Noise Exposure Safety

 

Working in noisy environments presents daily safety challenges to wildland firefighters. Noise exposure research clearly indicates that accidents and injuries increase in noisy work environments. Additionally, did you know that hearing loss is permanent? The good news is it’s also preventable.

Those most at risk of excessive noise exposure include:

  • Sawyers/swampers
  • Heavy equipment operators
  • Helitack/helibase/airtanker base personnel 
  • Engine and pump operators
  • Masticator/chipper workers
  • Operators of weed whackers/leaf blowers/air compressors
  • Retardant mixing personnel

Noise exposure will cause:

  • Fatigue
  • Headaches
  • Distraction
  • Miscommunication
  • Inability to hear warnings
  • Increased errors

Mitigation Techniques

  • When possible, stay as far away from the noise source as possible.
  • Limit the amount of time you are exposed to the noise.
  • Give your ears a break from the noise when possible; the quiet break will help conserve your hearing.
  • Always wear hearing protection making certain that:
    • Your hearing protection has a Noise Reduction Ratio (NRR) of at least 20 dBA (level of protection in decibels) which is listed on the package.
    • You know how to insert/use/maintain them.
    • Your ear plugs are clean.​
      • NOTE: dirty ear plugs are better than no ear plugs but grab some extras because they work better when changed often.
    • When not in use, keep your ear plugs somewhere safe and clear (preferably not your Nomex buttonhole).
6. Be alert. Keep calm. Think clearly. Act decisively. On the left side of a split screen, four firefighters stand near a wildland fire, listening to a radio in the hands of one.  On the right side of the screen, a supervisory firefighter talks into a handheld radio.

6. Be alert. Keep calm. Think clearly. Act decisively.

Remaining alert, keeping calm, thinking clearly, and acting decisively are important components of decision-making on wildland fire incidents. This Standard Firefighting Order illustrates a supervisor providing direction and establishing leader's intent to help a crew working on a growing fire.

Read about all 10 Standard Firefighting Orders.

Discussion Questions

  • How can exposure to excessive noise reduce the firefighter’s ability to maintain good situational awareness and fulfill the 10 Standard Fire Orders?
    • Be alert. Keep calm. Think clearly. Act decisively.
    • Give clear instructions and be sure they are understood.
    • Fight fire aggressively, having provided for safety first.
  • Are you wearing hearing protection when you work in all noisy environments?
  • What are some solutions for a flight helmet that lets noise in because the ear cup doesn’t fit correctly?
  • When working with chainsaws, mowers, and weed whackers, etc., at home, how do you protect your hearing?

Action:

  1. Look at your ear plugs. If they’re dirty, get a new pair and a spare.
  2. Find out if your unit has a hearing conservation program and join it.
  3. Consider turning down your music just a little bit, especially when you listen with earbuds.

 

6MFS Suggestion Form


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

Last Modified / Reviewed:

NWCG Latest Announcements

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002

2024 Wildland Fire Emergency Medical Service Awards

Date: May 22, 2025
Questions?  Please contact:
Emergency Medical Committee

The NWCG Emergency Medical Committee (EMC) is proud to announce the recipients of the 2024 Wildland Fire Emergency Medical Service Awards. Each year, EMC recognizes individuals and groups who have demonstrated exceptional actions or accomplishments that go above and beyond their normal mission or job duties.

Congratulations to all the awardees and nominees. Through leadership and initiative, they have made significant contributions to the safety and well-being of the wildland fire community. These honors are well deserved.

References:

2024 Wildland Fire EMS Awards

NWCG Emergency Medical Committee

NWCG Welcomes the Incident Management Teams Association as an Associate Member

Date: May 21, 2025
Questions?  Please contact:
https://www.nwcg.gov/contact-us

The NWCG Executive Board is honored to announce that the Incident Management Teams Association (IMTA) has joined the National Wildfire Coordinating Group as an associate member.

IMTA is a dedicated group of incident management professionals committed to enhancing the profession by promoting standards and fostering collaboration across federal, state, local, Tribal, and private sector partners throughout all phases of incident management.

“Joining NWCG aligns with our mission to elevate incident management professionals nationwide,” said Dr. Randal Collins, President of IMTA. “This is a proud moment for all of us committed to advancing public safety.”

References:

Incident Management Teams Association

National Wildfire Coordinating Group