Skip to main content

In Country Not Seen in Daylight

 

Firefighting resources are often called to respond to fires at night in unfamiliar terrain. This Watch Out shows firefighters working at night in an area they are seeing for the first time which requires extra attention to surroundings and caution while working.

2. In country not seen in daylight. Three firefighters carrying tools walk in the dark.  Their headlamps illuminate a large brush in front of them.

2. In country not seen in daylight.

Read about all 18 Watch Out Situations.

 

Often, firefighters arrive on a fire after dark, addressed by Watch Out Situation #2. Before safely fighting fire in country not seen in daylight, firefighters must answer the following questions:

  • Can the resources you are replacing give you a thorough briefing? Identify where you can get information. Can you meet up with the departing overhead/resource leaders?
  • Can you observe the area or use scouts? List ways you could observe the work area.
  • Have escape routes and safety zones been thoroughly scouted and marked for night use? Talk about what constitutes an escape route and a safety zone. Who would identify them and in what ways might they be marked?
  • Have potential dangers been located? Can they be mitigated? What are the dangers associated with working in unfamiliar country in the dark? How can they be mitigated?
  • Reduce the risks by:
    • Posting lookouts.
    • Checking communications.
    • Retreating if you have doubts about your escape routes or safety zones or the situation becomes too complex.
      • Give examples of arriving on a fire after dark and what was done to allow you to fight fire safely in country not seen in daylight.
    • Identifying prominent geographic features.

 

Last Modified / Reviewed:


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

NWCG Latest Announcements

Updated NWCG Standards for Airtanker Base Operations, PMS 508

Date: March 31, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

The updated NWCG Standards for Airtanker Base Operations (SABO), PMS 508 standardizes operations and procedures at interagency airtanker bases to ensure safe, efficient, and effective operations in support of interagency goals and objectives.

References:

NWCG Standards for Airtanker Base Operations, PMS 508

WFSTAR 2025 Core Component Module Package and 2024 Fire Year in Review Now Available

Date: March 14, 2025
Questions?  Please contact:
Joe Schindel at mschindel@blm.gov
 

The 2025 Core Component Module Package for RT-130, Wildland Fire Safety Training Annual Refresher (WFSTAR) and the 2024 Fire Year in Review are now available on the NWCG website. The 2025 Core Component Module Package provides all content needed to deliver RT-130.

References:

2025 Core Component Module Package

2024 Fire Year in Review Module

NEW! NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053

Date: March 12, 2025
Contact: Wildland Urban Interface Mitigation Committee

The NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 provides mitigation practitioners at all experience levels with recommendations on the most effective and efficient ways to accomplish mitigation work in communities at risk to wildfire damage or destruction. The content in this guide was written in coordination with the NWCG Standards for Mitigation in the Wildland Urban Interface, PMS 052.

References:

NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 

Updated, NWCG Standards for Wildland Fire Module Operations, PMS 430

Date: March 11, 2025
Contact: Fire Use Subcommittee
Wildland Fire Module Unit

The NWCG Standards for Wildland Fire Module Operations, PMS 430 standardizes procedures and expectations for Wildland Fire Modules (WFMs). These standards are to be used by staff, supervisors, specialists, and technicians for planning, administering, and conducting WFM operations. These standards will also be used as a measure of WFM qualifications, capabilities, and expected performance, for both Type 1 and Type 2 WFMs.

References:

NWCG Standards for Wildland Fire Module Operations, PMS 430