Skip to main content

6MFS

6MFS Committee

All 6MFS Topics

6MFS Calendar

Aviation

Airtankers

Felling Safety

Fire Communication

Firefighter Health & First Aid

Leadership

Misc Fireline Hazards

Operational Engagement

This Day in History

Vehicles - Roads

Weather - Fire Behavior

Week of Remembrance

ATV - How to Properly Ride and Operate

Riding an ATV correctly allows the operator to control the machine easily and react more quickly to changes in terrain and environment. Proper riding posture includes:

  • head and eyes up, looking forward,
  • shoulders relaxed, with elbows bent slightly,
  • hands on the handlebars,
  • knees in toward the gas tank,
  • feet on the footrests, toes pointing straight ahead, and
  • back straight but not tense.
  • To turn an ATV, keep most of your body weight on the outside foot peg and lean your upper body into the turn. Never lower your foot to the ground for stability as it could cause ejection if foot is caught by the tire.
  • When climbing hills, shift your body weight forward to keep the front wheels on the ground.
  • If stopped while going uphill, do not apply the rear brake only. Apply equal pressure to both front and rear brakes, but never only to the rear brake. Get off the machine and turn it around to proceed down the hill.
  • When going downhill, keep the engine running and in low gear, apply both front and rear brakes with even pressure and avoid sharp turns. Slide body forward on seat towards gas tank, keeping body weight back by leaning backwards. This will help keep weight on back wheels and lessen the potential to flip the ATV over forward.
  • Avoid sidehill situations. When they are unavoidable, lean into the hill.
  • When carrying a load uphill, if possible, place load on the front of the ATV to help keep the front end of the ATV from flipping over. If going downhill, place load on back of ATV to help keep the ATV from flipping over forward. If loads cannot be adjusted, try to equalize the load on front and back if possible. Drip torches should be mounted on back.
  • Only operate an ATV under the conditions for which you have been trained, qualified for, and have experience riding.
  • As a last resort to avoid an impending collision, roll off the vehicle and kick yourself free of it.
Category
Vehicles Roads

6MFS Suggestion Form


Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee
 


Follow NWCG on X and Facebook
 


 

Last Modified / Reviewed:

Print PDF

NWCG Latest Announcements

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002

2024 Wildland Fire Emergency Medical Service Awards

Date: May 22, 2025
Questions?  Please contact:
Emergency Medical Committee

The NWCG Emergency Medical Committee (EMC) is proud to announce the recipients of the 2024 Wildland Fire Emergency Medical Service Awards. Each year, EMC recognizes individuals and groups who have demonstrated exceptional actions or accomplishments that go above and beyond their normal mission or job duties.

Congratulations to all the awardees and nominees. Through leadership and initiative, they have made significant contributions to the safety and well-being of the wildland fire community. These honors are well deserved.

References:

2024 Wildland Fire EMS Awards

NWCG Emergency Medical Committee

NWCG Welcomes the Incident Management Teams Association as an Associate Member

Date: May 21, 2025
Questions?  Please contact:
https://www.nwcg.gov/contact-us

The NWCG Executive Board is honored to announce that the Incident Management Teams Association (IMTA) has joined the National Wildfire Coordinating Group as an associate member.

IMTA is a dedicated group of incident management professionals committed to enhancing the profession by promoting standards and fostering collaboration across federal, state, local, Tribal, and private sector partners throughout all phases of incident management.

“Joining NWCG aligns with our mission to elevate incident management professionals nationwide,” said Dr. Randal Collins, President of IMTA. “This is a proud moment for all of us committed to advancing public safety.”

References:

Incident Management Teams Association

National Wildfire Coordinating Group