Skip to main content

Driver, CDL Required

Position Description

Duties

  • Operates cargo vans, stake trucks, buses with capacity of more than 20 passengers, etc., having gross vehicle weight between 16,000 and 32,000 pounds or requires a commercial driver’s license.
  • Operates vehicles that usually have air brakes and two or more gear ranges capable of providing six or more forward speeds.
  • Drives vehicles on and off roads, through all kinds of traffic, terrain, and weather to haul cargo or passengers.
  • Loads and unloads vehicle, and sees that cargo is loaded properly and protected.
  • Responsible for operator maintenance, vehicle servicing, and vehicle record keeping.
  • Delivers supplies and equipment to the fireline, base and spike camps.
  • Drives personnel to and from base camp, fireline, and airports.

Position Knowledge and/or Requirements

  • Valid commercial driver’s license (CDL).
  • Medical certificate or card.
  • CDL Class A or B with the appropriate endorsements or lack of restrictions as follows (source:  ID Dept of Transportation)
    • Class A – Combination vehicles with a gross combination weight rating (GCWR) of 26,001 or more pounds, provided the GVWR of the vehicle(s) being towed is greater than 10,000 pounds.  Drivers with a Class A license may, with the proper endorsements, operate vehicles requiring a Class B, C or D license.
    • Class B – Single vehicles with a GVWR of 26,001 or more pounds, or any such vehicle towing a vehicle 10,000 pounds GVWR or less.  Drivers with a Class B license may, with the proper endorsements, operate vehicles requiring a Class C or D license.
    • Endorsements –  you must have the appropriate endorsement on your CDL if you haul hazardous materials, pull double or triple trailers, or drive tank or passenger vehicles.
  • Hazardous Materials (H) –  Required for drivers of vehicles transporting hazardous materials requiring placards per the Hazardous Materials Transportation Act.  A written test and Transportation Security Administration security threat assessment is required at each driver license renewal date.
  • Double/Triple (T) – Required for drivers of vehicles pulling two or three trailers.  (A dolly or load divider, sometimes referred to as a “jeep”, is considered to be one trailer.)
  • Tank Vehicles (N) – Required for drivers of vehicles designed to transport liquids or gaseous materials within a tank that is either permanently or temporarily attached to the vehicle or chassis.  Such vehicles include, but are not limited to, cargo tanks and portable tanks, as defined in hazardous materials regulation.  This definition does not include portable tanks having a rated capacity under 1,000 gallons.
  • Passenger (P) – Required for drivers of vehicles designed to carry 16 or more passengers including driver.  Both written and skills test are required to obtain this endorsement.
  • School bus (S) – Required for drivers of vehicles transporting primary or secondary school students from home to school, from school to home, or to and from school-sponsored events.  Both written and skills tests are required to obtain this endorsement.
    • By federal regulation, an applicant cannot be issued a CDL with the school bus endorsement only; they must always have both the school bus endorsement and passenger endorsement to drive a school bus.
    • Restriction
  • L Restriction – Prohibits driving of vehicles with air brakes.  The CDL will carry this restriction unless you pass an air brakes knowledge test and a skills test in a vehicle equipped with air brakes.
  • N Restriction – Prohibits the driver from operating Class A or B passenger vehicles (buses).  A Class A or B CDL with the passenger endorsement will carry this restriction unless the driver obtains a passenger endorsement by successfully completing a skills test in a Class B passenger vehicle (bus).

NWCG Latest Announcements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Date: July 10, 2024
Contact: Incident Medical Unit Subcommittee 

A new publication from the Incident Medical Unit Subcommittee is now available. The NWCG Standards for Rapid Extraction Module Support, PMS 552 will be used as a guide and as an opportunity to begin to build out Rapid Extraction Module Support (REMS) modules for the remainder of Fire Year 2024. These standards will be fully implemented as the minimum standard starting in January 2025.

NWCG Standards for Rapid Extraction Module Support outlines the roles, duties, qualifications, and equipment pertinent to REMS. A REMS team, strategically stationed at wildland fires, plays a pivotal role in prioritizing swift access and medical treatment to injured or ill firefighters for safe and efficient egress off the fireline. This ensures their rapid transport to definitive medical care in cases of emergency during firefighting operations, highlighting the invaluable contribution of the REMS team to firefighter safety and well-being.

References:

NWCG Standards for Rapid Extraction Module Support, PMS 552

National Wildland Firefighter Day

Date: July 2, 2024
Contact: National Interagency Fire Center 

The National Wildfire Coordinating Group (NWCG) would like to recognize July 2, 2024, as National Wildland Firefighter Day (NWFFD). Established in 2022, NWFFD honors the dedication of wildland firefighters and support personnel. This day falls within the 2024 Week of Remembrance (June 30 - July 6), providing an opportunity to renew our commitment to wildland firefighter safety while remembering those who have fallen in the line of duty.

NWCG continues to provide leadership to enable interoperable wildland fire operations among federal, state, local, Tribal, and territorial partners. NWCG standards and training establish common practices to contribute to safe, effective, and coordinated national interagency wildland fire operations.

References:

NWCG.gov

Week of Remembrance

National Wildland Firefighter Day

2024 Week of Remembrance

Date: June 27, 2024
Contact: 6 Minutes for Safety Subcommittee 

As we approach the 2024 Week of Remembrance (WOR), June 30 to July 6, we dedicate this time to thoughtfully reviewing and recognizing the events of the 2018 Mendocino Complex. As such, this year’s theme of “Learning From the Mendocino Complex” embodies a longstanding hallmark of WOR, honoring through learning.

Throughout the week, our energy will be directed toward fostering generative conversations in briefing rooms and at tailgates.

References:

6 Minutes for Safety - 2024 Week of Remembrance

Wildland Fire Lessons Learned Center

Updated NWCG Wildland Fire Risk and Complexity Assessment, PMS 236

Date: June 24, 2024
Contact: Incident and Position Standards Committee 

The June 2024 update of the NWCG Wildland Fire Risk and Complexity Assessment, PMS 236, is now available to meet the current needs for incident management typing.

The NWCG Wildland Fire Risk and Complexity Assessment should be used to evaluate firefighter safety issues, assess risk, and identify the appropriate incident management organization based on incident complexity. Assessing risk, determining incident complexity, and identifying an appropriate incident management organization is a subjective process based on examining a combination of indicators or factors, which can change over time.

References:

NWCG Wildland Fire Risk and Complexity Assessment, PMS 236