Skip to main content

Cadre Support

Position Description

Introduction

This position serves as a Technical Specialist to the relative courses/training.  While not a lead instructor nor an NWCG-certified instructor, this position would function as a mentor/coach and would assist instructor cadres with student learning. Hours under hire in this position would count as “Instructor Hours”).

Major Duties

  • Take direction from lead instructors or course coordinators.
  • Provide coaching to trainees in an active role
  • Manage various tasks and decision making, dependent on the criteria and analysis of each mentoring/coaching opportunity.
  • Provide counsel and advice to trainees.
  • Provide examples of work experience to groups or individuals and assist trainees in interpreting course and test materials.

Knowledge Required by the Position

  • Individual must have technical expertise that correlates with the specific training.
  • Individual must be able to communicate verbally and in writing.
  • Individual must possess skills and knowledge in the technical aspects of coaching/mentoring.
  • Individual must have working knowledge of current safety principles and practices.
  • If an individual is serving as a coach/mentor for an NWCG recognized position, they must be qualified and have experience performing in that position.

Supervisory Controls

The employee will work under the general supervision of the course coordinator or lead instructors. Instructors and coordinators will provide guidance and instruction regarding course/instructor expectations, guidance and policy, special problems, or unusual or difficult tasks that may fall outside of the mentor/coach position.

Guidelines

Guidelines will include NWCG course materials, NWCG Publications (e.g., IRPG), and other agency or non-agency material applicable to area of expertise.

Complexity/Scope and Effect

The purpose of the work is to provide additional guidance to individuals participating in training opportunities. These programs and materials have a wide impact on the management of incidents. Position complexity will increase dependent on course level and required experience. 

Personal Contacts/Purpose of Contacts

Individual will have contacts with course instructors and coordinators, students, and other mentors, as well as state or local government employees.   

Physical Demands

Light to Moderate:

Light – Duties may involve office type work with occasional field activity characterized by light physical exertion requiring basic good health. Activities may include climbing stairs, standing, operating a vehicle, and hours of long work, as well as some bending, stooping or light lifting. Individuals can usually govern the extent and pace of their physical activity.

Moderate – Duties involve fieldwork requiring complete control of all physical faculties and may include considerable walking over irregular ground, standing for long periods of time, lifting 25-50 pounds, climbing, bending, stooping, squatting twisting and reaching.  Individuals usually set their own work pace.  

Position Needs

The individual hired must either have a level of qualifications/training that will be recognized by the instructor(s) as being beneficial to mentor students or have IQCS qualifications that align with the course being taught.

 

 

NWCG Latest Announcements

Incident Position Standards and Next Generation Position Task Book Available for Helicopter Crewmember

Date: April 28, 2025
Questions?  Please contact:
Interagency Helicopter Operations Subcommittee

NWCG is excited to announce that the NWCG Incident Position Standards for Helicopter Crewmember, PMS 350-22, and the NWCG Position Task Book for Helicopter Crewmember (HECM), PMS 311-22, are now available.

These resources, part of the Performance Support Package developed through the Incident Performance and Training Modernization (IPTM) effort, support trainees, qualified personnel, and evaluators.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1.

References:

NWCG Incident Position Standards for Helicopter Crewmember, PMS 350-22

NWCG Incident Position Standards for Helicopter Crewmember, PMS 350-22

NWCG Position Task Book for Helicopter Crewmember (HECM), PMS 311-22

Updated NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

Date: April 23, 2025
Questions?  Please contact:
Interagency Fire Unmanned Aircraft Systems Subcommittee

The NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515 standardizes processes and procedures for the interagency use of Unmanned Aircraft Systems (UAS), including pilot inspections and approvals. This updated publication provides the aviation community with standards to ensure UAS are used safely, effectively, and efficiently in support of fire management goals and objectives.

References:

NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

NWCG National Interagency Aviation Committee

ETC Bulletin 25-001: Retrofitted Hot/Cold Beverage Kits - 2025 Field Season

Date: April 16, 2025
Questions?  Please contact:
Equipment Technology Committee

Due to spout failures and the associated risk of burn injuries, manufacturers have retrofitted the Hot/Cold Beverage Kits using a heat-shrinking band to secure the black spout at the insertion site. The updated kits feature a fluorescent label on each full kit assembly for easy identification. Catering units are encouraged to confirm the clear heat-shrinking bands are intact around each spout before filling.

ETC Bulletin 24-001 regarding Hot/Cold Beverage Kits has been archived and replaced by ETC Bulletin 25-001 for the 2025 season.

References:

NWCG Alerts

ETC-EB-25-001 Retrofitted Hot/Cold Beverage Kits

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)