Skip to main content

Compensation/Claims Unit Leader*

COMP decorative banner: photos depicting COMP position.

The Compensation/Claims Unit Leader (COMP) is responsible for the overall management and direction of all administrative matters pertaining to compensation-for-injury and claims-related activities related to an incident. The COMP is responsible for supervising other areas within the unit when activated and reports to the Finance Section Chief (FSC). The COMP works in the Finance/Administration functional area.

USWDS Paragraphs

The Forest Service and Department of Interior are enabled by Administratively Determined Pay Plans (AD Pay Plans) to hire persons for temporary duration for the following reasons:

  1. To cope with a sudden and unexpected emergency caused by a fire, or extreme fire potential, flood, storm, or any other all-hazard emergency that threatens damage to federally protected property, has the potential to cause loss of life, serious injury, public health risk, or damage to natural or cultural resources unless brought under immediate control.
  2. To provide emergency assistance to States under formalized agreements.
  3. To meet mission assignments issued by the Federal Emergency Management Agency (FEMA).

The National Wildfire Coordinating Group (NWCG) Incident Business Committee (IBC) reviews positions annually and establishes pay rate classifications for each position.

For more information on the AD Pay Plans, visit Incident Business Committee.

Date: Jan 2023

Added: 

  • Finance/Administration Section Chief Complex (FSCC) to "These Positions Maintain Currency for COMP."
  • Finance/Administration Section Chief Complex (FSCC) to "COMP Maintains Currency for These Positions."

Removed:

  • Claims Specialist (CLMS) and Compensation-for-Injury Specialist (INJR) from "These Positions Maintain Currency for COMP."
  • Claims Specialist (CLMS) and Compensation-for-Injury Specialist (INJR) from "COMP Maintains Currency for These Positions."
Date: Jan 2020

Added: Incident Position Description (IPD) approved.

Date: Oct 2019

Added: To Required Experience: Note: Once qualified as a COMP, the CLMS and INJR qualifications may be granted by the certifying official. Certification must be documented. 

Date: Nov 2016

Added: Introduction to ICS (ICS-100) and NIMS — An Introduction (IS-700) to Required Training.

Removed:
Satisfactory performance as a Compensation-for Injury Specialist (INJR) from Required Experience.
Satisfactory performance as a Claims Specialist (CLMS) from Required Experience.

Added: Completion and Certification of Position Task Book (311-47) as a Compensation/Claims Unit Leader (COMP)* to Required Experience.

Added: The following language: *Certification as COMP will allow certification as CLMS and INJR.

Date: Oct 1984

Position created.

USWDS Paragraph Bundles

Primary Committee: Incident Business Committee


Last Modified / Reviewed:

NWCG Latest Announcements

Incident Position Standards and Next Generation Position Task Book Available for Helicopter Crewmember

Date: April 28, 2025
Questions?  Please contact:
Interagency Helicopter Operations Subcommittee

NWCG is excited to announce that the NWCG Incident Position Standards for Helicopter Crewmember, PMS 350-22, and the NWCG Position Task Book for Helicopter Crewmember (HECM), PMS 311-22, are now available.

These resources, part of the Performance Support Package developed through the Incident Performance and Training Modernization (IPTM) effort, support trainees, qualified personnel, and evaluators.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1.

References:

NWCG Incident Position Standards for Helicopter Crewmember, PMS 350-22

NWCG Incident Position Standards for Helicopter Crewmember, PMS 350-22

NWCG Position Task Book for Helicopter Crewmember (HECM), PMS 311-22

Updated NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

Date: April 23, 2025
Questions?  Please contact:
Interagency Fire Unmanned Aircraft Systems Subcommittee

The NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515 standardizes processes and procedures for the interagency use of Unmanned Aircraft Systems (UAS), including pilot inspections and approvals. This updated publication provides the aviation community with standards to ensure UAS are used safely, effectively, and efficiently in support of fire management goals and objectives.

References:

NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

NWCG National Interagency Aviation Committee

ETC Bulletin 25-001: Retrofitted Hot/Cold Beverage Kits - 2025 Field Season

Date: April 16, 2025
Questions?  Please contact:
Equipment Technology Committee

Due to spout failures and the associated risk of burn injuries, manufacturers have retrofitted the Hot/Cold Beverage Kits using a heat-shrinking band to secure the black spout at the insertion site. The updated kits feature a fluorescent label on each full kit assembly for easy identification. Catering units are encouraged to confirm the clear heat-shrinking bands are intact around each spout before filling.

ETC Bulletin 24-001 regarding Hot/Cold Beverage Kits has been archived and replaced by ETC Bulletin 25-001 for the 2025 season.

References:

NWCG Alerts

ETC-EB-25-001 Retrofitted Hot/Cold Beverage Kits

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)