Skip to main content

Driver, CDL Required

Position Description

Duties

  • Operates cargo vans, stake trucks, buses with capacity of more than 20 passengers, etc., having gross vehicle weight between 16,000 and 32,000 pounds or requires a commercial driver’s license.
  • Operates vehicles that usually have air brakes and two or more gear ranges capable of providing six or more forward speeds.
  • Drives vehicles on and off roads, through all kinds of traffic, terrain, and weather to haul cargo or passengers.
  • Loads and unloads vehicle, and sees that cargo is loaded properly and protected.
  • Responsible for operator maintenance, vehicle servicing, and vehicle record keeping.
  • Delivers supplies and equipment to the fireline, base and spike camps.
  • Drives personnel to and from base camp, fireline, and airports.

Position Knowledge and/or Requirements

  • Valid commercial driver’s license (CDL).
  • Medical certificate or card.
  • CDL Class A or B with the appropriate endorsements or lack of restrictions as follows (source:  ID Dept of Transportation)
    • Class A – Combination vehicles with a gross combination weight rating (GCWR) of 26,001 or more pounds, provided the GVWR of the vehicle(s) being towed is greater than 10,000 pounds.  Drivers with a Class A license may, with the proper endorsements, operate vehicles requiring a Class B, C or D license.
    • Class B – Single vehicles with a GVWR of 26,001 or more pounds, or any such vehicle towing a vehicle 10,000 pounds GVWR or less.  Drivers with a Class B license may, with the proper endorsements, operate vehicles requiring a Class C or D license.
    • Endorsements –  you must have the appropriate endorsement on your CDL if you haul hazardous materials, pull double or triple trailers, or drive tank or passenger vehicles.
  • Hazardous Materials (H) –  Required for drivers of vehicles transporting hazardous materials requiring placards per the Hazardous Materials Transportation Act.  A written test and Transportation Security Administration security threat assessment is required at each driver license renewal date.
  • Double/Triple (T) – Required for drivers of vehicles pulling two or three trailers.  (A dolly or load divider, sometimes referred to as a “jeep”, is considered to be one trailer.)
  • Tank Vehicles (N) – Required for drivers of vehicles designed to transport liquids or gaseous materials within a tank that is either permanently or temporarily attached to the vehicle or chassis.  Such vehicles include, but are not limited to, cargo tanks and portable tanks, as defined in hazardous materials regulation.  This definition does not include portable tanks having a rated capacity under 1,000 gallons.
  • Passenger (P) – Required for drivers of vehicles designed to carry 16 or more passengers including driver.  Both written and skills test are required to obtain this endorsement.
  • School bus (S) – Required for drivers of vehicles transporting primary or secondary school students from home to school, from school to home, or to and from school-sponsored events.  Both written and skills tests are required to obtain this endorsement.
    • By federal regulation, an applicant cannot be issued a CDL with the school bus endorsement only; they must always have both the school bus endorsement and passenger endorsement to drive a school bus.
    • Restriction
  • L Restriction – Prohibits driving of vehicles with air brakes.  The CDL will carry this restriction unless you pass an air brakes knowledge test and a skills test in a vehicle equipped with air brakes.
  • N Restriction – Prohibits the driver from operating Class A or B passenger vehicles (buses).  A Class A or B CDL with the passenger endorsement will carry this restriction unless the driver obtains a passenger endorsement by successfully completing a skills test in a Class B passenger vehicle (bus).

NWCG Latest Announcements

Incident Position Standards and the Next Generation Position Task Books Now Available for ICT5 and FFT1

Date: July 29, 2025
Questions?  Please contact:
Incident Command Subcommittee
Incident Operations Subcommittee

NWCG is excited to announce that Incident Position Standards and the Next Generation Position Task Books are now available for Incident Commander Type 5 (ICT5) and Firefighter Type 1 Squad Boss (FFT1).

The Performance Support Packages for these positions were developed as part of the Incident Performance and Training Modernization effort. These resources support trainees, qualified personnel, and evaluators in their respective roles.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1, scheduled for January 2026.

References:

NWCG Incident Commander Type 5 Position Page

NWCG Firefighter Type 1 Squad Boss Position Page

Incident Position Standards and the Next Generation Position Task Books Now Available for ATBM and FWBM

Date: July 28, 2025
Questions?  Please contact:
Airtanker Base Operations Unit

NWCG is excited to announce that Incident Position Standards and the Next Generation Position Task Books are now available for Airtanker Base Manager (ATBM) and Fixed Wing Base Manager (FWBM).

The Performance Support Packages for these positions were developed as part of the Incident Performance and Training Modernization effort. These resources support trainees, qualified personnel, and evaluators in their respective roles.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1, scheduled for January 2026.

References:

NWCG Airtanker Base Manager Position Page

NWCG Fixed Wing Base Manager Position Page

Incident Position Standards and the Next Generation Position Task Books Now Available for PROC and TIME

Date: July 17, 2025
Questions?  Please contact:
Incident Business Committee

NWCG is excited to announce that Incident Position Standards and the Next Generation Position Task Books are now available for Procurement Unit Leader (PROC) and Time Unit Leader (TIME).

The Performance Support Packages for these positions were developed as part of the Incident Performance and Training Modernization (IPTM) effort. These resources support trainees, qualified personnel, and evaluators in their respective roles.

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1 update, scheduled for January 2026.

References:

NWCG Procurement Unit Leader Position Page

NWCG Time Unit Leader Position Page

National Wildland Firefighter Day

Date: July 2, 2025
Questions?  Please contact:
National Interagency Fire Center

The National Wildfire Coordinating Group (NWCG) recognizes July 2, 2025, as National Wildland Firefighter Day (NWFFD). Established in 2022, NWFFD honors the dedication of wildland firefighters and support personnel. This day falls within the 2025 Week of Remembrance (June 30 - July 6), providing an opportunity to renew our commitment to wildland firefighter safety while remembering those who have fallen in the line of duty.

NWCG provides leadership to enable interoperable wildland fire operations among federal, state, local, Tribal, and territorial partners. NWCG standards and training establish common practices to contribute to safe, effective, and coordinated interagency wildland fire operations nationwide.

References:

Week of Remembrance

National Wildland Firefighter Day