Skip to main content

Interagency Helicopter Screening and Evaluation Subcommittee

Banner Image
IHSES header graphic. Photo of a helicopter with a water bucket flying over mountains. Inset photos of a helicopter with a cable strung out in front of it, and another photo with a helicopter ground crew checking equipment in the helicopter. Decorative.
Mission Statement

Mission Statement

When requested the Interagency Helicopter Screening and Evaluation Subcommittee (IHSES) evaluates helicopters and related accessories for potential use in interagency fleet or contract helicopter operations.

Body

Primary Objectives

Photo of El Capitan with a temporary helibase located in foreground. Decorative.

  • Evaluation of aircraft and accessories which have no historic precedence in natural resource flight operations.
  • Develop guidance for nomination of potential aircraft and or accessories.
  • Establish, document and implement a standardized helicopter evaluation process. 
  • Establish, document and implement a standardized accessory evaluation process.

IHSES Standard Operating Procedures

Once an aircraft or accessory nomination has been approved by NIAC, the IHSES will

  • Develop an individual testing and evaluation plan for nominated aircraft and/or accessories tailored to the requesting agency or mission needs.  Plans will address, at minimum, the following 9 elements:  safety, performance, support requirements, field evaluation results, cost, advantages/disadvantages, policy, agreements and guides, recommended action (approve/disapprove).
  • Establish agreements for funding, contracting language, policy acceptations and any other required documentation to ensure testing can be completed.
  • Provide regular updates on IHSES activities, testing progression and accomplishments to NIAC.
  • Present test plan results to NIAC for approval.
  • Document NIAC's decision and maintain list of approved aircraft and accessories.

The IHSES will consist of three members to provide support during the development of the nomination and evaluation process.  Once an aircraft or accessory has been nominated and approved, the IHSES composition will be dictated by the scope of work.  Composition of the IHSES will depend extensively on the mission requirements of the nomination and the complexity of the test plan.

 

Chair: Bill Sloan

NWCG Coordinator: Dave Schultz

Parent Committee: National Interagency Aviation Committee

Meeting Schedule: TBD

Page Last Modified or Reviewed:

NWCG Latest Announcements

ETC Bulletin 25-001: Retrofitted Hot/Cold Beverage Kits - 2025 Field Season

Date: April 16, 2025
Questions?  Please contact:
Equipment Technology Committee

Due to spout failures and the associated risk of burn injuries, manufacturers have retrofitted the Hot/Cold Beverage Kits using a heat-shrinking band to secure the black spout at the insertion site. The updated kits feature a fluorescent label on each full kit assembly for easy identification. Catering units are encouraged to confirm the clear heat-shrinking bands are intact around each spout before filling.

ETC Bulletin 24-001 regarding Hot/Cold Beverage Kits has been archived and replaced by ETC Bulletin 25-001 for the 2025 season.

References:

NWCG Alerts

ETC-EB-25-001 Retrofitted Hot/Cold Beverage Kits

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412