Skip to main content

National Fuel Geyser Awareness

Fuel Geyser Triangle with Fuel, Heat, and Pressure as the sides.

Click Here to Report Fuel Geyser Incidents

 

What is a fuel geyser?

The rapid and energetic expulsion of heated fuel in a closed container when a fuel container is quickly depressurized. Heat and agitation causes the pressure increase. A delayed fuel geyser can occur after the fuel container is opened.

 

 

What does a fuel geyser look like?

Why is this important to me?

Over the last two years three significant burn injuries have occurred on prescribed fire and wildland fire incidents. Many additional fuel geyser incidents have been reported. These events happen frequently and have the potential to harm users of power equipment and people refueling power equipment. If you experience or have experienced a fuel geyser please report it.

Incident Reports

The following reports contain incidents where fuel geysers have occurred:

What do I need to know to protect myself?

Fuel geysers can happen anytime when there is fuel, heat & pressure from small gasoline-powered engines, chainsaws, leaf blowers, portable pumps, even when opening fuel transport containers.

Fuel geysers have resulted in injury when sprayed fuel and vapor ignite.

Appropriate precautions when there is fuel, heat & pressure, may prevent significant burns in the event of fuel spray.

  • Always assume fuel tanks and fuel containers are pressurized.
  • Ensure the cap is correctly secured.
  • Always check fuel levels before opening the fuel tank or filler cap. Fuel levels greater than ½ tank may geyser.
  • Move at least 20 feet or more from any heat source. 
  • For safety cans with pour spouts, direct potential spray away.
  • Cover the cap with a rag to contain potential fuel geyser spray.
  • Be extra vigilant when equipment is running poorly with fuel levels above ½ tank.
  • Start the saw at least 10 feet from the fueling area.
  • Do not use fuel older than one month.

If the equipment is running poorly or vapor lock is suspected:

  1. Do not open fuel cap. Relieving the pressure does not alleviate a “vapor lock” equipment.
  2. Check fuel level through the tank or use the bar oil level to gage fuel level.
  3. If fuel level is over ½ full, DO NOT open the tank.
  4. Allow the equipment to thoroughly cool. This could take over 45 minutes.
  5. When the equipment is cool, restart the equipment.

It’s YOUR job to protect yourself and others. Know how to handle your equipment to avoid fuel geysers anytime there is fuel, heat & pressure.

What should I do If I experience a fuel geyser?

Please REPORT every fuel geyser incident you experience!

The information you provide our engineers can mean the difference between one of our employees getting injured or not.

To report an incident go to Fuel Geyser Incident Reporting Form.

Location of Incidents

View a map of fuel geysering incidents and fuel requirements.

Videos

Video: USFS - Fuel Geysering: Predictable?

 

 

NWCG Latest Announcements

2024 Wildland Fire Emergency Medical Service Awards

Date: May 22, 2025
Questions?  Please contact:
Emergency Medical Committee

The NWCG Emergency Medical Committee (EMC) is proud to announce the recipients of the 2024 Wildland Fire Emergency Medical Service Awards. Each year, EMC recognizes individuals and groups who have demonstrated exceptional actions or accomplishments that go above and beyond their normal mission or job duties.

Congratulations to all the awardees and nominees. Through leadership and initiative, they have made significant contributions to the safety and well-being of the wildland fire community. These honors are well deserved.

References:

2024 Wildland Fire EMS Awards

NWCG Emergency Medical Committee

NWCG Welcomes the Incident Management Teams Association as an Associate Member

Date: May 21, 2025
Questions?  Please contact:
https://www.nwcg.gov/contact-us

The NWCG Executive Board is honored to announce that the Incident Management Teams Association (IMTA) has joined the National Wildfire Coordinating Group as an associate member.

IMTA is a dedicated group of incident management professionals committed to enhancing the profession by promoting standards and fostering collaboration across federal, state, local, Tribal, and private sector partners throughout all phases of incident management.

“Joining NWCG aligns with our mission to elevate incident management professionals nationwide,” said Dr. Randal Collins, President of IMTA. “This is a proud moment for all of us committed to advancing public safety.”

References:

Incident Management Teams Association

National Wildfire Coordinating Group

Updated NWCG Guide for Wildland Fire Modules, PMS 431

Date: May 14, 2025
Questions?  Please contact:
Fire Use Subcommittee

The updated NWCG Guide for Wildland Fire Modules, PMS 431 serves as a supplemental resource for wildland fire module operations, providing information frequently used in the field.

PMS 431 defines the organizational structure, staffing, and qualifications for Type 1 and Type 2 Wildland Fire Modules, outlining their roles in wildland fire suppression, prescribed fire, and resource management. The NWCG Guide for Wildland Fire Modules, PMS 431, should be used in conjunction with the NWCG Standards for Wildland Fire Module Operations, PMS 430.

References:

NWCG Guide for Wildland Fire Modules, PMS 431

NWCG Standards for Wildland Fire Module Operations, PMS 430

Updated NWCG Standards for Wildland Fire Resource Typing, PMS 200 Now Includes Off-Highway Vehicle Typing Standards

Date: May 13, 2025
Questions?  Please contact:
Mobile Fire Equipment Subcommittee 

The NWCG Standards for Wildland Fire Resource Typing, PMS 200 has been updated to include newly developed Off-Highway Vehicle (OHV) typing standards. These standards organize OHV information into logical categories and outline key safety requirements for occupants.

NWCG Standards for Wildland Fire Resource Typing, PMS 200 establishes minimum typing standards for aircraft, crews, and equipment used in national mobilization to wildland fire incidents. Typing designations are assigned based on measurable capability and performance criteria.

References:

NWCG Standards for Wildland Fire Resource Typing, PMS 200