Skip to main content

National Fuel Geyser Awareness

Fuel Geyser Triangle with Fuel, Heat, and Pressure as the sides.

Click Here to Report Fuel Geyser Incidents

 

What is a fuel geyser?

The rapid and energetic expulsion of heated fuel in a closed container when a fuel container is quickly depressurized. Heat and agitation causes the pressure increase. A delayed fuel geyser can occur after the fuel container is opened.

 

 

What does a fuel geyser look like?

Why is this important to me?

Over the last two years three significant burn injuries have occurred on prescribed fire and wildland fire incidents. Many additional fuel geyser incidents have been reported. These events happen frequently and have the potential to harm users of power equipment and people refueling power equipment. If you experience or have experienced a fuel geyser please report it.

Incident Reports

The following reports contain incidents where fuel geysers have occurred:

What do I need to know to protect myself?

Fuel geysers can happen anytime when there is fuel, heat & pressure from small gasoline-powered engines, chainsaws, leaf blowers, portable pumps, even when opening fuel transport containers.

Fuel geysers have resulted in injury when sprayed fuel and vapor ignite.

Appropriate precautions when there is fuel, heat & pressure, may prevent significant burns in the event of fuel spray.

  • Always assume fuel tanks and fuel containers are pressurized.
  • Ensure the cap is correctly secured.
  • Always check fuel levels before opening the fuel tank or filler cap. Fuel levels greater than ½ tank may geyser.
  • Move at least 20 feet or more from any heat source. 
  • For safety cans with pour spouts, direct potential spray away.
  • Cover the cap with a rag to contain potential fuel geyser spray.
  • Be extra vigilant when equipment is running poorly with fuel levels above ½ tank.
  • Start the saw at least 10 feet from the fueling area.
  • Do not use fuel older than one month.

If the equipment is running poorly or vapor lock is suspected:

  1. Do not open fuel cap. Relieving the pressure does not alleviate a “vapor lock” equipment.
  2. Check fuel level through the tank or use the bar oil level to gage fuel level.
  3. If fuel level is over ½ full, DO NOT open the tank.
  4. Allow the equipment to thoroughly cool. This could take over 45 minutes.
  5. When the equipment is cool, restart the equipment.

It’s YOUR job to protect yourself and others. Know how to handle your equipment to avoid fuel geysers anytime there is fuel, heat & pressure.

What should I do If I experience a fuel geyser?

Please REPORT every fuel geyser incident you experience!

The information you provide our engineers can mean the difference between one of our employees getting injured or not.

To report an incident go to Fuel Geyser Incident Reporting Form.

Location of Incidents

View a map of fuel geysering incidents and fuel requirements.

Videos

Video: USFS - Fuel Geysering: Predictable?

 

 

NWCG Latest Announcements

New Job Aids Available: Packing Lists for Wildland Fire Fireline Personnel and Support Staff, J-101 and J-102

Date: December 3, 2024
Contact: NWCG TRAINING

Two new job aids are now available: Packing List for Wildland Fire Fireline Personnel, J-101 and Packing List for Wildland Fire Support Personnel, J-102, should serve as a baseline for items needed on a wildland fire assignment. These lists will help personnel prepare for a 14 to 21-day assignment on the fireline or in a support role.

References:

Job Aid Catalog

NWCG Packing List for Wildland Fire Fireline Personnel, J-101

NWCG Packing List for Wildland Fire Support Staff, J-102

NWCG Equipment Technology Committee Releases Safety Warning: 24-001 Stihl Chainsaw Toolless Fuel Cap Spill Prevention

Date: November 14, 2024
Contact: Equipment Technology Committee

The Equipment Technology Committee (ETC) has released Safety Warning: 24-001 Stihl Chainsaw Toolless Fuel Cap Spill Prevention. Misaligned toolless fuel caps on Stihl chainsaws have led to recurring fuel spillage, fuel ignition, and burn injuries during wildland fire management operations.

This Safety Warning is intended to highlight the details and recommended procedures for the installation of a Stihl chainsaw toolless fuel cap, as well as how to identify and correct a misaligned, damaged, or broken fuel cap to help prevent fuel spillage.

References:

NWCG Safety Warning: 24-001 Stihl Chainsaw Toolless Fuel Cap Spill Prevention

Advertencia de equipos 24-001: Prevención de derrames de la tapa de combustible sin herramientas de la motosierra Stihl

NWCG Alerts

The Incident Position Standards and Next Generation Position Task Book are now available for Equipment Time Recorder (EQTR)

Date: November 13, 2024
Contact: Incident Business Committee

NWCG is excited to announce that the NWCG Incident Position Standards for Equipment Time Recorder, PMS 350-51 and NWCG Position Task Book for Equipment Time Recorder (EQTR), PMS 311-51 are now available.

The Performance Support Package, which for EQTR, includes the Incident Position Standards and Next Generation Position Task Book were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.

References:

NWCG Equipment Time Recorder Position Page

NWCG Incident Position Standards for Equipment Time Recorder, PMS 350-51

NWCG Position Task Book for Equipment Time Recorder (EQTR), PMS 311-51

The Incident Position Standards and Next Generation Position Task Book are now available for Personnel Time Recorder (PTRC)

Date: November 13, 2024
Contact: Incident Business Committee

NWCG is excited to announce that the NWCG Incident Position Standards for Personnel Time Recorder, PMS 350-53 and NWCG Position Task Book for Personnel Time Recorder (PTRC), PMS 311-53 are now available.

The Performance Support Package, which for PTRC, includes the Incident Position Standards and Next Generation Position Task Book were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.

References:

NWCG Personnel Time Recorder Position Page

NWCG Incident Position Standards for Personnel Time Recorder, PMS 350-53

NWCG Position Task Book for Personnel Time Recorder (PTRC), PMS 311-53