Skip to main content

Planning Section Chief Type 1*

PSC1 decorative banner: photos depicting PSC1 position. PSC1 Position Description: The Planning Section Chief (PSC1), a member of the General Staff, is responsible for collecting, evaluating, disseminating, and using information about the development of the incident, status of resources, and demobilization of the incident. Information is needed to understand the current situation, predict probable course of incident events, prepare alternative strategies and control operations for the incident, and provide for an orderly and economical demobilization of the incident.

The Planning Section Chief Type 1 (PSC1) manages all aspects of incident planning, situation and resource status, and demobilization of an incident. The PSC1 supervises members of the Planning Section. The PSC1 is part of the Command and General (C&G) Staff and reports to the Incident Commander (IC) under typical incident organizations. The PSC1 works in the Planning functional area.

The PSC1 performs position duties commensurate with Type 1 incident complexity and characteristics stated in the Interagency Standards for Fire and Fire Aviation Operations (Red Book). (Type 1, 2 and 3 PSC duties are identical but performed at different complexity levels.)

USWDS Paragraphs

Planning Section Chief (PSC3) Resources Unit Leader (RESL) Status/Check-in Recorder (SCKN) Situation Unit Leader (SITL) Field Observer (FOBS) Fire Effects Monitor (FEMO) Infrared Interpreter (IRIN) Display Processor (DPRO) Fire Behavior Analyst (FBAN) Strategic Operational Planner (SOPL) Long Term Fire Analyst (LTAN) Geographic Information System Specialist (GISS) Document Unit Leader (DOCL) Demobilization Leader (DMOB) Interagency Resource Representative (IARR) Human Resource Specialist (HRSP) Incident Training Specialist (TNSP) Planning Section Chief (PSC2) Planning Section Chief (PSC1) Planning Section Chief (PSCC)

 

The Forest Service and Department of Interior are enabled by Administratively Determined Pay Plans (AD Pay Plans) to hire persons for temporary duration for the following reasons:

  1. To cope with a sudden and unexpected emergency caused by a fire, or extreme fire potential, flood, storm, or any other all-hazard emergency that threatens damage to federally protected property, has the potential to cause loss of life, serious injury, public health risk, or damage to natural or cultural resources unless brought under immediate control.
  2. To provide emergency assistance to States under formalized agreements.
  3. To meet mission assignments issued by the Federal Emergency Management Agency (FEMA).

The National Wildfire Coordinating Group (NWCG) Incident Business Committee (IBC) reviews positions annually and establishes pay rate classifications for each position.

For more information on the AD Pay Plans, visit Incident Business Committee.

Date: Jan 2025

Removed:

Required Training

  • S-520, Advanced Incident Management OR Complex Incident Management Course (CIMC)

Required Experience

  • Satisfactory performance as a Planning Section Chief Type 2 (PSC2)
  • AND Completion and Certification of NWCG Planning Section Chief Type 1 (PSC1) Position Task Book, PMS 311-23

​OR

  • Satisfactory performance as an Operations Section Chief Type 1 (OSC1)
  • AND Completion and Certification of NWCG Planning Section Chief Type 1 (PSC1) Position Task Book, PMS 311-23*

OR

  • Satisfactory performance as a Logistics Section Chief Type 1 (LSC1)
  • AND Completion and Certification of NWCG Planning Section Chief Type 1 (PSC1) Position Task Book, PMS 311-23*

OR

  • Satisfactory performance as a Safety Officer Type 1 (SOF1)
  • AND Completion and Certification of NWCG Planning Section Chief Type 1 (PSC1) Position Task Book, PMS 311-23*

* Individuals utilizing this pathway must complete the Planning Section Chief Course (S-440) prior to position qualification.

 

Added:

The qualification pathway for this position is discontinued per NWCG direction on January, 2025. Responders with an active PTB will transition to the corresponding complex position PTB.

Date: May 2022

Added: Planning Section Chief Complex (PSCC) to "These Positions Maintain Currency For PSC1" and "PSC1 Maintains Currency For These Positions."

Date: Dec 2020

Added: Incident Position Description (IPD) approved.

Date: Oct 2018

Added: “Individuals utilizing this pathway must complete the Planning Section Chief Course (S-440) prior to position qualification.”

Date: Oct 2015

Updated: Prerequisite Experience modified as follows:

Satisfactory performance as a Planning Section Chief Type 2 (PSC2).
     +
Completion and Certification of Position Task Book (PMS 311-23) as a Planning Section Chief Type 1 (PSC1) on a wildfire incident.
     OR
Satisfactory performance as an Operations Section Chief Type 1 (OSC1).
     +
Completion and Certification of Position Task Book (PMS 311-23) as a Planning Section Chief Type 1 (PSC1) on a wildfire incident.
     OR
Satisfactory performance as a Logistics Section Chief Type 1 (LSC1).
     +
Completion and Certification of Position Task Book (PMS 311-23) as a Planning Section Chief Type 1 (PSC1) on a wildfire incident.
     OR
Satisfactory performance as a Safety Officer Type 1 (SOF1).
     +
Completion and Certification of Position Task Book (PMS 311-23) as a Planning Section Chief Type 1 (PSC1) on a wildfire incident.

Removed: Planning Section Chief Type 3 (PSC3) from These Positions Maintain Currency for PSC1 positions and PSC1 Maintains Currency for These Positions.

Date: Oct 1993

Position created. 

Planning Section Chief (Multi-Branch), Planning Section Chief (Multi-Division) and Planning Section Chief (Multi-Leader) in 1984 PMS 310-1.

USWDS Paragraph Bundles

Primary Committee: Incident and Position Standards Committee
Steward: Incident Planning Subcommittee


Last Modified / Reviewed:

Please Provide Feedback

Indicates required field

NWCG values your constructive input and we thank you for taking the time to provide feedback.

Although contact information is optional, we hope that you provide a way for us to contact you in case we need clarification on your comment. If you would like to be contacted regarding your feedback, you must provide contact information. 

Would you like a response?
If you would like a response, you must provide contact information (name and email) below.
One file only.
9.28 GB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, mp4, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.
CAPTCHA
Image CAPTCHA
Enter the characters shown in the image.
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

NWCG Latest Announcements

ETC Equipment Bulletin: 25-003 Flame-Resistant Shirt Survey

Date: June 12, 2025
Questions?  Please contact:
Equipment Technology Committee

The U.S. Forest Service National Technology and Development Program (NTDP) is seeking input on the Forest Service-designed flame-resistant (FR) shirt, currently available through the National Interagency Support Cache system and FedMall.

NTDP is conducting a product review to improve future FR shirt designs. As part of this effort, a short survey is now open for federal employees who have worn any of three recent FR shirt models. Feedback will guide design improvements to better meet the needs of wildland firefighters.

To comply with the Paperwork Reduction Act, responses are limited to federal employees. The survey is open through September 12, 2025. 

References:

NWCG Alerts

ETC Equipment Bulletin: 25-003

NEW! S-130, Firefighter Training (Blended) Now Available

Date: June 10, 2025
If you have questions, please visit our FAQ page. 
If your question is not answered there, you can 
submit your question using our Contact Us form. 
 

The S-130, Firefighter Training (Blended), equips new wildland firefighters with essential skills through a mix of online learning and hands-on training. The course features a required online component and an instructor-led exercise, reinforcing online concepts with practical performance-based training.

The course builds competencies in wildland fire operations, safety, and equipment use, applicable across various operational environments. Both the online component and instructor-led field exercise must be completed to receive a certificate of completion. Students are required to finish the prerequisite S-190, Introduction to Wildland Fire Behavior, before enrolling in S-130, Firefighter Training (Blended).

References:

S-130, Firefighter Training (Blended)

S-190, Introduction to Wildland Fire Behavior

Wildland Fire Learning Portal

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002