Skip to main content

PMS 448

PMS 448

PMS 448

Introduction

COVID-19 Refurb Guidelines

References

All Content

Aviation

Camp

Clothing

Cordura

Fuel Handling

Kits

Medical

Miscellaneous

PPE

Small Engine Equipment

Tools

Water Handling

Deleted Items

Sprayer – Handheld, 1-4 Gallon

NFES #
009981
Category
Camp
Updated
Storage and Shelf Life Checks
None

Initial Inspection/Disposal Criteria

  1. Inspect for sanitizing solution in container. If any, dispose of properly.
  2. Inspect for indelible writing or marks on the tank. If it can not be removed, salvage available parts, and dispose of tank.
  3. Inspect for leaks or separation along any seams, or screw in connection points. Dispose of container if any are present.
  4. Inspect inside of container for any foreign matter that cannot be removed or identified. Dispose of container if this has occurred
  5. Inspect all threads, moving parts, locking mechanism, pressure relief valve, or spring mechanism for serviceability. If economical to repair, use only manufacturer specific parts for replacement. If not economical, dispose of sprayer.
  6. Return to stock if item does not show any signs of use and passes visual inspection.
  7. Refurbish if item has been used and/or damage is repairable.

Refurbishing Procedures

A. Cleaning

  1. Drain all existing sanitizer and dispose of properly. See Safety Data Sheet (SDS) for recommendation.
  2. Wash container inside and out with mild detergent with brush/scouring pad or power wash.
  3. Rinse thoroughly. Fill tank with clean water, use the hand pump to pressurize the tank, and spray clean water through spray wand and hose until clean.
  4. Turn upside down with lids off or open and let air dry.

B. Repair

  1. Replace gaskets if stiff, damaged, or missing.
  2. Assemble sprayer with clean water in the tank. Use the hand pump to pressurize the tank and spray water through wand. While tank is pressurized, check all connections for leaks. Replace gaskets, spray wands, or relief valves as needed and economical to repair.
  3. Replace nozzles as needed using only manufacturer replacement parts.

C. Testing for Performance

  • Assemble sprayer with clean water in the tank. Use the hand pump to pressurize the tank and spray water through wand. While tank is pressurized, check all connections for leaks.

D. Repackaging

  • Local cache option.

 

Print PDF

NWCG Latest Announcements

NWCG Equipment Technology Committee Releases Safety Warning: 25-001 Non-specification fire shelters

Date: January 15, 2025
Contact: Equipment Technology Committee

The Equipment Technology Committee (ETC) has released Safety Warning: 25-001 Non-specification fire shelters. Non-specification fire shelters claiming to meet Forest Service (FS) fire shelter specification 5100-606 were first found in February of 2023. As of September 2024, non-specification shelters are again being advertised and sold on the open market.

This Safety Warning outlines details and recommended procedures to purchase FS specification shelters made with materials and components that meet performance criteria and toxicity testing requirements outlined in FS Specification 5100-606. 

For additional information on identifying non-specification shelters, please view ETC Safety Warning 23-01.

References:

ETC Safety Warning 25-001: Non-specification fire shelters

NWCG Equipment Technology Committee

ETC Safety Warning 23-01

Paul Gleason Lead by Example Awards

Date: January 14, 2025
Contact: Leadership Committee

The NWCG Leadership Committee has awarded the 2023 Paul Gleason “Lead By Example” awards to individuals in the categories of Initiative and Innovation, Mentoring and Teamwork, and Motivation and Vision, as well as a Lifetime Achievement Award.

Congratulations to the awardees:

  • Sam Bowen, Superintendent of the Mark Twain Veteran Crew with the U.S. Forest Service.
  • Greg Titus, Zone Fire Management Officer for the St. Marks National Wildlife Refuge with U.S. Fish and Wildlife Service.
  • Renae Crippen, Manager of the Blue Mountain Interagency Dispatch Center with the U.S. Forest Service.
  • Eric Carlson, Instructor with OMNA International.

References:

Paul Gleason Lead by Example Award

Wildland Fire Leadership Development Program

Interview with Paul Gleason

Updated NWCG Standards for Water Scooping Operations, PMS 518

Date: December 19, 2024
Contact: Water Scooper Operations Unit

The NWCG Standards for Water Scooping Operations, PMS 518 establishes the standards for dispatching, utilizing, and coordinating water scooping aircraft on interagency wildland fires. These standards should be used in conjunction with the NWCG Standards for Aerial Supervision (SAS), PMS 505, and any local, state, or geographic/regional water scooping plans.

References:

NWCG Standards for Water Scooping Operations, PMS 518

Updated NWCG Standards for Aerial Supervision, PMS 505

Date: December 19, 2024
Contact: Interagency Aerial Supervision Subcommittee

The Interagency Aerial Supervision Subcommittee has updated the NWCG Standards for Aerial Supervision, PMS 505. PMS 505 establishes standards for aerial supervision operations for national interagency wildland fire operations. 

References:

NWCG Standards for Aerial Supervision, PMS 505