Skip to main content

PMS 448

PMS 448

PMS 448

Introduction

COVID-19 Refurb Guidelines

References

All Content

Aviation

Camp

Clothing

Cordura

Fuel Handling

Kits

Medical

Miscellaneous

PPE

Small Engine Equipment

Tools

Water Handling

Deleted Items

Bottle-Spray, Plastic, W/Oz Markings, 12-32 Oz

NFES #
009985
Category
Camp
Updated
Storage and Shelf Life Checks
None

Initial Inspection/Disposal Criteria

  1. Inspect for sanitizing solution in container. If any, dispose of properly.
  2. Inspect for indelible writing or marks on the bottle. If it cannot be removed, salvage available parts, and dispose of bottle.
  3. Inspect for leaks or separation along any seams, or screw in connection points. Dispose of container if any are present.
  4. Inspect inside of container for any foreign matter that cannot be removed or identified. Dispose of container if this has occurred.
  5. Inspect all threads, moving parts, or spraying mechanism for serviceability. If economical to repair, use only manufacturer-specific parts for replacement. If not economical, dispose of sprayer.
  6. Return to stock if item does not show any signs of use and passes visual inspection.
  7. Refurbish if item has been used and/or damage is repairable.

Refurbishing Procedures

A. Cleaning

  1. Drain all existing sanitizer and dispose of properly. See Safety Data Sheets (SDS) for recommendation.
  2. Wash container inside and out with mild detergent with brush/scouring pad or garden hose.
  3. Rinse thoroughly. Fill bottle with clean water and use the spraying mechanism to rinse out feed tube and spray head.
  4. Turn upside down with lids off or open and let air dry.

B. Repair

  1. Replace gaskets if stiff, damaged, or missing.
  2. Assemble sprayer with clean water in the bottle. Use the spraying mechanism spray water through spray head. While pumping, ensure there are no leaks and that the pumping mechanism is functioning properly. Hold the bottle upside down and check all connections for leaks. Replace gaskets, spray heads, and feed tubes as needed and economical to repair.
  3. Replace spray heads as needed using only manufacturer replacement parts.

C. Testing for Performance

  • None

D. Repackaging

  • Local cache option.

 

Print PDF

NWCG Latest Announcements

ETC Bulletin 25-001: Retrofitted Hot/Cold Beverage Kits - 2025 Field Season

Date: April 16, 2025
Questions?  Please contact:
Equipment Technology Committee

Due to spout failures and the associated risk of burn injuries, manufacturers have retrofitted the Hot/Cold Beverage Kits using a heat-shrinking band to secure the black spout at the insertion site. The updated kits feature a fluorescent label on each full kit assembly for easy identification. Catering units are encouraged to confirm the clear heat-shrinking bands are intact around each spout before filling.

ETC Bulletin 24-001 regarding Hot/Cold Beverage Kits has been archived and replaced by ETC Bulletin 25-001 for the 2025 season.

References:

NWCG Alerts

ETC-EB-25-001 Retrofitted Hot/Cold Beverage Kits

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog

Updated, NWCG Guide to Wildland Fire Origin and Cause Determination, PMS 412

Date: April 8, 2025
Questions?  Please contact:
Wildland Fire Investigation Subcommittee

PMS 412 provides guidance for wildland fire investigations. This guide outlines recommended procedures, practices, techniques, and methods to promote a systematic approach. The last update to this publication was in 2016.

References:

NWCG Guide to Wildland Fire Origin and Cause Determination PMS 412