Skip to main content

PMS 448

PMS 448

PMS 448

Introduction

COVID-19 Refurb Guidelines

References

All Content

Aviation

Camp

Clothing

Cordura

Fuel Handling

Kits

Medical

Miscellaneous

PPE

Small Engine Equipment

Tools

Water Handling

Deleted Items

Chaps – Protective, Summer Weight

NFES #
000044
Category
Cordura
Updated
Storage and Shelf Life Checks
None

Initial Inspection/Disposal Criteria

  1. Inspect fabric and webbing for any holes, cuts, tears, or burns. Tears less than ½ inch can be repaired.  Tears or cuts longer than ½” render the item unserviceable. 
  2. Inspect for any area of abrasion that has weakened fabric beyond repair.
  3. Inspect for any webbing that is cut, burned, or abraded beyond economical repair.
  4. Inspect each leg, if either leg has more than five patches.
  5. Chaps should be removed from service if not labeled with specification USFS 6170-4F or are not certified to NFPA 1977-05.  
  6. Inspect all molded nylon hardware for dirt, cracks, breaks, and proper function.
  7.  Return to stock if item does not show any signs of use and passes visual inspection.
  8. Refurbish if the item needs to be cleaned and/or damage can be repaired economically.
  9. Dispose of item if it fails initial inspection.
  10. Dispose of item if wood chips and sawdust are evident inside the layers at the bottom of the chaps.
  11. Dispose of item if the first layer of yellow Kevlar has a cut that is more than 1 inch long.
  12. Dispose of item if improper repairs have been made, such as patch jobs that stitched through the Kevlar.

Refurbishing Procedures

A.  Cleaning

  1. Allow any mud or loose dirt to dry and then remove using a stiff-bristle brush.  If stains remain, wash as recommended below.
  2. Remove light oil and dirt stains by brushing with a Citrosqueeze® solution, brush with a bristle brush, rinse thoroughly and hang to dry.
  3. For heavier oil or grease soak in a Citrosqueeze® solution for at least 4 hours, brush with a bristle brush, rinse thoroughly and hang to dry

DO NOT MACHINE WASH OR DRY.

DO NOT USE BLEACH TO CLEAN FABRIC.

DO NOT PRESSURE WASH.

B. Repair

  1. Repair burn holes and cuts. 
  2. Use Seam Grip® to repair holes or cuts in the nylon shell. 
  3. To repair holes less than ½ inch in length, apply a dot of Seam Grip® over the hole and allow the Seam Grip® to dry. 
  4. Allow chaps to dry for at least 12 hours before using
  5. Replace burned, abraded, or cut nylon webbing with like items.
  6. Replace broken or nonfunctioning hardware.                                                                                 

C. Testing for Performance

  • Retest all replaced hardware. The hardware should function easily with little force being applied and no difficulty in the release.

D.  Repackaging

  • Pack 10 each in NFES #002007 carton (24” x 16” x 16”).

 

 

Print PDF

NWCG Latest Announcements

2024 Wildland Fire Emergency Medical Service Awards

Date: May 22, 2025
Questions?  Please contact:
Emergency Medical Committee

The NWCG Emergency Medical Committee (EMC) is proud to announce the recipients of the 2024 Wildland Fire Emergency Medical Service Awards. Each year, EMC recognizes individuals and groups who have demonstrated exceptional actions or accomplishments that go above and beyond their normal mission or job duties.

Congratulations to all the awardees and nominees. Through leadership and initiative, they have made significant contributions to the safety and well-being of the wildland fire community. These honors are well deserved.

References:

2024 Wildland Fire EMS Awards

NWCG Emergency Medical Committee

NWCG Welcomes the Incident Management Teams Association as an Associate Member

Date: May 21, 2025
Questions?  Please contact:
https://www.nwcg.gov/contact-us

The NWCG Executive Board is honored to announce that the Incident Management Teams Association (IMTA) has joined the National Wildfire Coordinating Group as an associate member.

IMTA is a dedicated group of incident management professionals committed to enhancing the profession by promoting standards and fostering collaboration across federal, state, local, Tribal, and private sector partners throughout all phases of incident management.

“Joining NWCG aligns with our mission to elevate incident management professionals nationwide,” said Dr. Randal Collins, President of IMTA. “This is a proud moment for all of us committed to advancing public safety.”

References:

Incident Management Teams Association

National Wildfire Coordinating Group

Updated NWCG Guide for Wildland Fire Modules, PMS 431

Date: May 14, 2025
Questions?  Please contact:
Fire Use Subcommittee

The updated NWCG Guide for Wildland Fire Modules, PMS 431 serves as a supplemental resource for wildland fire module operations, providing information frequently used in the field.

PMS 431 defines the organizational structure, staffing, and qualifications for Type 1 and Type 2 Wildland Fire Modules, outlining their roles in wildland fire suppression, prescribed fire, and resource management. The NWCG Guide for Wildland Fire Modules, PMS 431, should be used in conjunction with the NWCG Standards for Wildland Fire Module Operations, PMS 430.

References:

NWCG Guide for Wildland Fire Modules, PMS 431

NWCG Standards for Wildland Fire Module Operations, PMS 430

Updated NWCG Standards for Wildland Fire Resource Typing, PMS 200 Now Includes Off-Highway Vehicle Typing Standards

Date: May 13, 2025
Questions?  Please contact:
Mobile Fire Equipment Subcommittee 

The NWCG Standards for Wildland Fire Resource Typing, PMS 200 has been updated to include newly developed Off-Highway Vehicle (OHV) typing standards. These standards organize OHV information into logical categories and outline key safety requirements for occupants.

NWCG Standards for Wildland Fire Resource Typing, PMS 200 establishes minimum typing standards for aircraft, crews, and equipment used in national mobilization to wildland fire incidents. Typing designations are assigned based on measurable capability and performance criteria.

References:

NWCG Standards for Wildland Fire Resource Typing, PMS 200