Skip to main content

PMS 448

Fence – Barricade, Plastic, 4’ X 100’

NFES #
000608
Category
Kits
Updated
Storage and Shelf Life Checks
None

Initial Inspection/Disposal Criteria

  1. Visually inspect for damage, tears, rips, dirt, grease, oil or paint. Inspect for length, if less than 100’ splicing may be required following refurbishment procedures. There should be no more than four splices in a 100’ section of fencing using fencing of similar style and pattern.
  2. Return to stock if item is in clean serviceable condition with four or less splices and minimal torn fence sections.
  3. Refurbish if item is repairable and easily cleaned.
  4. Dispose of item if sections are less than 50’ with previous spliced sections, if there is excessive damage, or shows paint, oil, or soiling that cannot be easily removed.

Refurbishing Procedures

A. Cleaning

  • Clean by sweeping or with high-pressure wash; or clean with mild detergent using a brush or scouring pad.

B. Repair

  1. Replace damage barricade section by splicing.
  2. Splice using small cable ties or small hog rings one top, one bottom, and one every 6 inches to ensure splice security; up to four splices of same type and pattern for each 100’ barricade fence.

C. Testing for performance

  • None

D. Repackaging

  • Re-roll and secure.

 

NWCG Latest Announcements

WFSTAR 2025 Core Component Module Package and 2024 Fire Year in Review Now Available

Date: March 14, 2025
Questions?  Please contact:
Joe Schindel at mschindel@blm.gov
 

The 2025 Core Component Module Package for RT-130, Wildland Fire Safety Training Annual Refresher (WFSTAR) and the 2024 Fire Year in Review are now available on the NWCG website. The 2025 Core Component Module Package provides all content needed to deliver RT-130.

References:

2025 Core Component Module Package

2024 Fire Year in Review Module

NEW! NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053

Date: March 12, 2025
Contact: Wildland Urban Interface Mitigation Committee

The NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 provides mitigation practitioners at all experience levels with recommendations on the most effective and efficient ways to accomplish mitigation work in communities at risk to wildfire damage or destruction. The content in this guide was written in coordination with the NWCG Standards for Mitigation in the Wildland Urban Interface, PMS 052.

References:

NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 

Updated, NWCG Standards for Wildland Fire Module Operations, PMS 430

Date: March 11, 2025
Contact: Fire Use Subcommittee
Wildland Fire Module Unit

The NWCG Standards for Wildland Fire Module Operations, PMS 430 standardizes procedures and expectations for Wildland Fire Modules (WFMs). These standards are to be used by staff, supervisors, specialists, and technicians for planning, administering, and conducting WFM operations. These standards will also be used as a measure of WFM qualifications, capabilities, and expected performance, for both Type 1 and Type 2 WFMs.

References:

NWCG Standards for Wildland Fire Module Operations, PMS 430

NEW! NWCG Standards for Airtanker Operations, PMS 514

Date: March 7, 2025
Contact: National Interagency Aviation Committee

The NWCG Standards for Airtanker Operations, PMS 514 establishes the standards for dispatching, utilizing, and coordinating airtankers on interagency wildland fires. These standards should be used in conjunction with the NWCG Standards for Aerial Supervision (SAS), PMS 505, NWCG Standards for Airtanker Base Operations (SABO), PMS 508, and any applicable agency plans.

References:

NWCG Standards for Airtanker Operations, PMS 514