Skip to main content

PMS 448

Headlamp – Firefighters, LED

NFES #
000718
Category
Miscellaneous
Updated
Storage and Shelf Life Checks
Yes
Storage and Shelf Life Procedure
Store without batteries.

Initial Inspection/Disposal Criteria

  1. Inspect for broken wires, rust or corrosion on any metal part, and cracks in the battery case, light bezel, or lens cover. Inspect for broken or missing components, O-Ring damage, battery leakage in the battery case, and dirt or damage to retention straps.
  2. Return to stock if item has not been removed from plastic bag, is clean and appears to have not been used (inspect for batteries in battery case).
  3. Refurbish item if easily cleaned and any missing or damaged components are available for replacement.
  4. Dispose of item if missing or damaged components aren’t replaceable; if battery leakage is discovered; or if unit fails testing for performance.

Refurbishing Procedures

A. Cleaning

  1. Wipe entire unit clean to include lamp housing, battery cam, and both sides of lens with soft cloth and mild soapy water.
  2. Remove retention straps and hand wash with mild detergent, rinse and air dry. Reinstall.

B. Repair

  1. Install new retention straps, battery case latch, and O-ring if required.
  2. Lightly lubricate the O-ring and lens cap threads with silicone grease when necessary.
  3. Salvage usable parts from unserviceable units when practical.

C. Testing for performance

  1. Test unit with new batteries.
  2. Test all light mode functions; if any bulb does not function, dispose of headlamp.
  3. Test elasticity of retention straps; if defective, replace.
  4. Check O-ring is present and pliable, replace as necessary.
  5. Remove batteries prior to storage.

D. Repackaging

  1. Individually package headlamp in plastic bag.
  2. Package 50 each in NFES #002006 carton (23” x 19” x 10”).

 

NWCG Latest Announcements

Updated NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

Date: April 23, 2025
Questions?  Please contact:
Interagency Fire Unmanned Aircraft Systems Subcommittee

The NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515 standardizes processes and procedures for the interagency use of Unmanned Aircraft Systems (UAS), including pilot inspections and approvals. This updated publication provides the aviation community with standards to ensure UAS are used safely, effectively, and efficiently in support of fire management goals and objectives.

References:

NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

NWCG National Interagency Aviation Committee

ETC Bulletin 25-001: Retrofitted Hot/Cold Beverage Kits - 2025 Field Season

Date: April 16, 2025
Questions?  Please contact:
Equipment Technology Committee

Due to spout failures and the associated risk of burn injuries, manufacturers have retrofitted the Hot/Cold Beverage Kits using a heat-shrinking band to secure the black spout at the insertion site. The updated kits feature a fluorescent label on each full kit assembly for easy identification. Catering units are encouraged to confirm the clear heat-shrinking bands are intact around each spout before filling.

ETC Bulletin 24-001 regarding Hot/Cold Beverage Kits has been archived and replaced by ETC Bulletin 25-001 for the 2025 season.

References:

NWCG Alerts

ETC-EB-25-001 Retrofitted Hot/Cold Beverage Kits

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog