Skip to main content

PMS 448

PMS 448

Introduction

COVID-19 Refurb Guidelines

References

All Content

Aviation

Camp

Clothing

Cordura

Fuel Handling

Kits

Medical

Miscellaneous

PPE

Small Engine Equipment

Tools

Water Handling

Deleted Items

Valve – Automatic Check and Bleeder 1 1/2” NH-F

NFES #
000228
Category
Water Handling
Updated
Storage and Shelf Life Checks
None

Initial Inspection/Disposal Criteria

  1. Inspect for missing parts (valves, plugs, and gaskets). Inspect for missing or damaged handle, damaged threads and fire exposure damage.
  2. Return to stock if item is clean, passes inspection, and is in unused condition.
  3. Refurbish if item exhibits damage that is repairable and item passes testing.
  4. Dispose of item if damaged beyond repair, fails Testing for Performance and cannot be repaired, or show signs of fire damage.

Refurbishing Procedures

A. Cleaning

  1. Wash with mild soap, brush if necessary.
  2. Rinse thoroughly and stand upright to dry.
  3. Lubricate female coupling with appropriate dry lubricant such as graphite. Wipe off excess.

B. Repair

  1. Replace missing or cracked gaskets and handle.
  2. Lubricate female coupling with dry lubricant such as graphite.

C. Testing for Performance

  1. Install valve on test pump.
  2. Fill with water; close handle.
  3. Attach caps or nozzle for testing.
  4. Test for leaks at 300 PSI for 3 minutes.
  5. Inspect for leaks around female coupling, the male flange, under the top of the handle shaft, on the bottom end of the handle shaft, and in the casing.
  6. Remove from test pump and ensure the check valve (flapper is operational).
  7. Retest valve after any repairs are made.

D. Repackaging

  1. Dry completely prior to packaging.
  2. NFES #008018 CARTON (12”X12”X8”) 10 PER CARTON 

 

Reference

Water Handling Equipment Guide, PMS 447-1 

 

Print PDF

NWCG Latest Announcements

NWCG Equipment Technology Committee Releases Safety Warning: 25-001 Non-specification fire shelters

Date: January 15, 2025
Contact: Equipment Technology Committee

The Equipment Technology Committee (ETC) has released Safety Warning: 25-001 Non-specification fire shelters. Non-specification fire shelters claiming to meet Forest Service (FS) fire shelter specification 5100-606 were first found in February of 2023. As of September 2024, non-specification shelters are again being advertised and sold on the open market.

This Safety Warning outlines details and recommended procedures to purchase FS specification shelters made with materials and components that meet performance criteria and toxicity testing requirements outlined in FS Specification 5100-606. 

For additional information on identifying non-specification shelters, please view ETC Safety Warning 23-01.

References:

ETC Safety Warning 25-001: Non-specification fire shelters

NWCG Equipment Technology Committee

ETC Safety Warning 23-01

Paul Gleason Lead by Example Awards

Date: January 14, 2025
Contact: Leadership Committee

The NWCG Leadership Committee has awarded the 2023 Paul Gleason “Lead By Example” awards to individuals in the categories of Initiative and Innovation, Mentoring and Teamwork, and Motivation and Vision, as well as a Lifetime Achievement Award.

Congratulations to the awardees:

  • Sam Bowen, Superintendent of the Mark Twain Veteran Crew with the U.S. Forest Service.
  • Greg Titus, Zone Fire Management Officer for the St. Marks National Wildlife Refuge with U.S. Fish and Wildlife Service.
  • Renae Crippen, Manager of the Blue Mountain Interagency Dispatch Center with the U.S. Forest Service.
  • Eric Carlson, Instructor with OMNA International.

References:

Paul Gleason Lead by Example Award

Wildland Fire Leadership Development Program

Interview with Paul Gleason

Updated NWCG Standards for Water Scooping Operations, PMS 518

Date: December 19, 2024
Contact: Water Scooper Operations Unit

The NWCG Standards for Water Scooping Operations, PMS 518 establishes the standards for dispatching, utilizing, and coordinating water scooping aircraft on interagency wildland fires. These standards should be used in conjunction with the NWCG Standards for Aerial Supervision (SAS), PMS 505, and any local, state, or geographic/regional water scooping plans.

References:

NWCG Standards for Water Scooping Operations, PMS 518

Updated NWCG Standards for Aerial Supervision, PMS 505

Date: December 19, 2024
Contact: Interagency Aerial Supervision Subcommittee

The Interagency Aerial Supervision Subcommittee has updated the NWCG Standards for Aerial Supervision, PMS 505. PMS 505 establishes standards for aerial supervision operations for national interagency wildland fire operations. 

References:

NWCG Standards for Aerial Supervision, PMS 505