Skip to main content

Constructing Line Without a Safe Anchor Point

8. Constructing line without safe anchor point. A red fire engine is located inside a burned area with flames all around it while a firefighter sprays water from a hose at some of the flames.

An anchor point is an advantageous location, usually a barrier to fire spread, from which to start constructing a fireline. This Watch Out depicts an engine crew working along the fire edge without a clear anchor point.

Read about all 18 Watch Out Situations.

When deciding where to build a fireline, the following considerations must be weighed:

  • Can you hold the line? How do you do so and ensure your safety if there is a danger of the fire hooking under/around you?
  • Are there adequate safety zones and escape routes? Review what constitutes an adequate safety zone and escape route. Who has the responsibility to designate them and monitor their continued suitability?
  • Can you develop your starting point into an anchor point? List some effective anchor points. Describe how you would develop your starting point into an anchor point.
  • Have you posted lookouts? Where should they be posted? Can they see the main fire? Describe the qualities of a skilled lookout?
  • Do you have effective communications? Who do you need to be in contact with? If there are problems with communications, what can you do to improve them?
  • To reduce risk, evaluate several locations before making a decision. Talk about fires where you have had to relocate the line because your anchor point did not hold the fire.
  • How have you mitigated Watch Out Situation #8 in the past?

 

Last Modified / Reviewed:

Have an idea or feedback?

Share it with the NWCG 6MFS Subcommittee.


Follow NWCG on Twitter and Facebook

NWCG Latest Announcements

NWCG Equipment Technology Committee Releases Safety Warning: 25-001 Non-specification fire shelters

Date: January 15, 2025
Contact: Equipment Technology Committee

The Equipment Technology Committee (ETC) has released Safety Warning: 25-001 Non-specification fire shelters. Non-specification fire shelters claiming to meet Forest Service (FS) fire shelter specification 5100-606 were first found in February of 2023. As of September 2024, non-specification shelters are again being advertised and sold on the open market.

This Safety Warning outlines details and recommended procedures to purchase FS specification shelters made with materials and components that meet performance criteria and toxicity testing requirements outlined in FS Specification 5100-606. 

For additional information on identifying non-specification shelters, please view ETC Safety Warning 23-01.

References:

ETC Safety Warning 25-001: Non-specification fire shelters

NWCG Equipment Technology Committee

ETC Safety Warning 23-01

Paul Gleason Lead by Example Awards

Date: January 14, 2025
Contact: Leadership Committee

The NWCG Leadership Committee has awarded the 2023 Paul Gleason “Lead By Example” awards to individuals in the categories of Initiative and Innovation, Mentoring and Teamwork, and Motivation and Vision, as well as a Lifetime Achievement Award.

Congratulations to the awardees:

  • Sam Bowen, Superintendent of the Mark Twain Veteran Crew with the U.S. Forest Service.
  • Greg Titus, Zone Fire Management Officer for the St. Marks National Wildlife Refuge with U.S. Fish and Wildlife Service.
  • Renae Crippen, Manager of the Blue Mountain Interagency Dispatch Center with the U.S. Forest Service.
  • Eric Carlson, Instructor with OMNA International.

References:

Paul Gleason Lead by Example Award

Wildland Fire Leadership Development Program

Interview with Paul Gleason

Updated NWCG Standards for Water Scooping Operations, PMS 518

Date: December 19, 2024
Contact: Water Scooper Operations Unit

The NWCG Standards for Water Scooping Operations, PMS 518 establishes the standards for dispatching, utilizing, and coordinating water scooping aircraft on interagency wildland fires. These standards should be used in conjunction with the NWCG Standards for Aerial Supervision (SAS), PMS 505, and any local, state, or geographic/regional water scooping plans.

References:

NWCG Standards for Water Scooping Operations, PMS 518

Updated NWCG Standards for Aerial Supervision, PMS 505

Date: December 19, 2024
Contact: Interagency Aerial Supervision Subcommittee

The Interagency Aerial Supervision Subcommittee has updated the NWCG Standards for Aerial Supervision, PMS 505. PMS 505 establishes standards for aerial supervision operations for national interagency wildland fire operations. 

References:

NWCG Standards for Aerial Supervision, PMS 505