Skip to main content

PMS 200

NWCG Standards for Wildland Fire Resource Typing, PMS 200

test picture

The NWCG Standards for Wildland Fire Resource Typing establishes minimum typing standards for aircraft, crews, and equipment for national mobilization to wildland fire incidents. These standards assign typing designations based on measurable capability and performance criteria. NWCG typing standards enable accurate ordering and acquisition of needed resources in support of nationally interoperable wildland fire operations.

The NWCG Standards for Wildland Fire Resource Typing is jointly developed and maintained by the following National Wildfire Coordinating Group (NWCG) committees and their subgroups:

  • NIMS Integration Committee (NIMSIC).
  • Equipment Technology Committee (ETC).
  • National Interagency Aviation Committee (NIAC).
  • Incident and Position Standards Committee (IPSC).

While they may contain current or useful information, previous versions are obsolete.  The user of this information is responsible for confirming they have the most up-to-date version.  NWCG is the sole source for the publication.

Comments, questions, and recommendations shall be submitted to the appropriate agency representative assigned to the steward for each resource.

References

 

Modified / Reviewed:

NWCG Latest Announcements

WFSTAR 2025 Core Component Module Package and 2024 Fire Year in Review Now Available

Date: March 14, 2025
Questions?  Please contact:
Joe Schindel at mschindel@blm.gov
 

The 2025 Core Component Module Package for RT-130, Wildland Fire Safety Training Annual Refresher (WFSTAR) and the 2024 Fire Year in Review are now available on the NWCG website. The 2025 Core Component Module Package provides all content needed to deliver RT-130.

References:

2025 Core Component Module Package

2024 Fire Year in Review Module

NEW! NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053

Date: March 12, 2025
Contact: Wildland Urban Interface Mitigation Committee

The NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 provides mitigation practitioners at all experience levels with recommendations on the most effective and efficient ways to accomplish mitigation work in communities at risk to wildfire damage or destruction. The content in this guide was written in coordination with the NWCG Standards for Mitigation in the Wildland Urban Interface, PMS 052.

References:

NWCG Wildland Urban Interface Mitigation Field Guide, PMS 053 

Updated, NWCG Standards for Wildland Fire Module Operations, PMS 430

Date: March 11, 2025
Contact: Fire Use Subcommittee
Wildland Fire Module Unit

The NWCG Standards for Wildland Fire Module Operations, PMS 430 standardizes procedures and expectations for Wildland Fire Modules (WFMs). These standards are to be used by staff, supervisors, specialists, and technicians for planning, administering, and conducting WFM operations. These standards will also be used as a measure of WFM qualifications, capabilities, and expected performance, for both Type 1 and Type 2 WFMs.

References:

NWCG Standards for Wildland Fire Module Operations, PMS 430

NEW! NWCG Standards for Airtanker Operations, PMS 514

Date: March 7, 2025
Contact: National Interagency Aviation Committee

The NWCG Standards for Airtanker Operations, PMS 514 establishes the standards for dispatching, utilizing, and coordinating airtankers on interagency wildland fires. These standards should be used in conjunction with the NWCG Standards for Aerial Supervision (SAS), PMS 505, NWCG Standards for Airtanker Base Operations (SABO), PMS 508, and any applicable agency plans.

References:

NWCG Standards for Airtanker Operations, PMS 514