Skip to main content

Air Tactical Group Supervisor

ATGS Incident Position Description

The Air Tactical Group Supervisor (ATGS) coordinates incident airspace, manages incident air traffic, and is the link between ground personnel and incident aircraft. The ATGS is an airborne firefighter who coordinates, assigns, and evaluates the use of aerial resources in support of incident objectives. The ATGS supervises the Leadplane Pilot (LPIL), Aerial Supervision Module (ASM), and Helicopter Coordinator (HLCO) positions when activated. The ATGS reports to an Incident Commander (IC) on initial attack and the Operations Section Chief (OSC), Air Operations Branch Director (AOBD), or operational designee on extended attack and complex incidents (Type 1, 2, or 3). The ATGS works in the Air Operations functional area.

Leadership Level 3, Leader of People (Develop Intent)

  • For additional information review Level 3 description, expected behaviors and knowledge, suggested development goals, and self-study opportunities.

Prepare and Mobilize

  • Ensure individual readiness.
  • Obtain and assemble information and materials needed for assignment.
  • Gather critical information pertinent to the assignment.
  • Travel to and check in at assignment.
  • Check in at assigned base of operations and with supervisor.
  • Obtain briefing from previous shift/assignment position as necessary.

Build The Team

  • Conduct self in a professional manner.
  • Establish and communicate chain of command, reporting procedures, risk management processes, radio frequency management, and aviation operational strategy.
  • Attend incident briefings if possible and obtain daily Incident Action Plan (IAP) or relevant plans and incident maps for the duration of incident.
  • Establish a common operating picture with supervisors and subordinates.
  • Establish cohesiveness among assigned resources.

Supervise and Direct Work Assignments

  • Identify, analyze, and use relevant situational information to make informed decisions and take appropriate actions.
  • Adjust actions based on changing information and evolving situation awareness. Develop and implement contingency plans. Communicate changing conditions to assigned resources and supervisor.
  • Monitor performance and provide immediate and regular feedback to assigned personnel.

Perform Air Tactical Group Supervisor-Specific Duties

  • Ensure that ATGS aircraft meet requirements in the NWCG Standards for Aerial Supervision, PMS 505, and the pilot is qualified to perform the air tactical mission per agency standards.
  • Ensure aircraft meets the mission parameters.
  • Plot coordinates on topographic maps, Sectional/World Aeronautical Charts (WACS), GPS, tablet, and other tools to navigate on incident.
  • Identify and map incident topography and landmarks in operating area to navigate on incident.
  • Ensure pilot and aerial supervisor pre-flight and pre-takeoff responsibilities are completed as outlined in the NWCG Standards for Aerial Supervision, PMS 505.
  • Complete after-takeoff duties and en route procedures. Adhere to guidelines in the NWCG Standards for Aerial Supervision, PMS 505.
  • Obtain mission briefings for initial and extended attack incidents. Record the information on an aircraft dispatch form and compile an appropriate cockpit kit of pertinent documents.
  • Provide initial attack aerial size up information for dispatch and coordinate with ground and management personnel.
  • Coordinate with ground personnel and fire management during initial and extended attack/Incident Management Team (IMT) incidents and provide the following:
    • Fire information and size up for tactical planning.
    • Evaluation of values at risk.
    • Recommended strategies, tactics, and resources needed.
    • Information to ground crews, and seek information on type of fuels and availability.
    • Procedures for ordering tactical aerial resources.
    • Safety oversight to ground resources.
  • Evaluate the airspace surrounding the incident to identify airspace conflicts or impacts to air operations, such as military operating areas (MOA), military training routes (MTR), special-use airspace (SUA), visual flight rules (VFR) airways, or airports.
  • Coordinate with AOBD or host agency unit aviation officer to identify retardant and foam use restriction areas.
  • Report known misapplications of wildland fire chemicals near avoidance areas to AOBD or adhere to local protocol reporting procedures.TA) and incident airspace.
  • Conduct standard briefings to all aircraft pilots for the following situations: initial briefing, tactical briefing, describing work location, guiding aircraft to targets, transition briefing, departure briefing, and emergency briefing. Adhere to the Standard Briefing Sequence located in the NWCG Standards for Aerial Supervision, PMS 505.
  • Determine ground elevation and/or mission flight altitudes to establish FTA altitudes for incoming aircraft including helicopters, airtankers, lead planes, ASM, smokejumpers, relief aerial supervision, and media if not previously determined.
  • Coordinate fixed-wing water scooper operations with helicopter operations.
  • Receive radio contact with inbound aircraft and grant permission to enter FTA.
  • Assign air resources according to strategy, tactics, and mission priorities.
  • Approve takeoff clearance and coordinate flight for unmanned aircraft system (UAS) operations. Ensure UAS follow assigned departure route and altitude.
  • Coordinate fixed-wing, helicopter, and mixed air traffic using pilot, aerial supervision/air traffic control (ATC), General Air Traffic Coordination Principles.
  • Coordinate helicopter air traffic while maintaining aircraft separation utilizing the following methods in the NWCG Standards for Aerial Supervision, PMS 505:
    • Vertical separation
    • Horizontal separation
    • Virtual fences
    • Helicopter routes
    • Helicopter daisy chains
    • Helicopter recon flights
    • Incident entry and exit corridors
    • Initial points, checkpoints, holding areas
    • Sequencing and interval dispatching
    • Intersecting routes
    • Non-standard patterns
  • Manage helicopter air tactics to provide continuity.
  • Perform post-mission procedures upon returning to base.
  • Temporary Flight Restrictions (TFR)
    • Initiate a request and define boundaries and dimensions for a TFR during initial attack and extended attack.
    • Provide clearance for all assigned/ordered aircraft into the incident TFR.
    • Coordinate with incident AOBD to recommend termination of an existing TFR and/or when the dimensions of the TFR should be changed.
  • Frequency Management
    • Monitor all assigned air-to-air frequencies and radio traffic, and maintain communications with assigned and en route incident aircraft.
    • Recognize and request different frequencies through dispatch or the IMT Communications Unit Leader (COML) when multiple incidents in relative proximity are sharing the same tactical frequencies.
    • Receive radio contact with inbound aircraft and grant permission to enter incident airspace.

Communicate and Coordinate

  • Utilize appropriate en route communications using common terminology and brevity with dispatch, ground resources, and other aircraft.
  • Vocalize the Prior to FTA entry portion of the Mission Checklist with pilot.
  • Coordinate with incident ground personnel, dispatch, and other aerial supervision resources to ensure continuity of aerial supervision before leaving the incident.
  • Ensure priorities and tactics are communicated and understood throughout involved functional areas.
  • Ensure clear understanding of expectations and timely communication within and across Incident Command System (ICS) functional areas and chain of command.
  • Establish communications and exchange necessary briefings/information with the following:
    • Support resources
    • Adjacent resources
    • Supervisor
    • Other ICS functional areas
  • Proactively expected fire and weather conditions based upon continuous observations of the area.
  • Coordinate with dispatch in a timely manner regarding appropriate information: ordering, assignment, and release of incident aircraft in accordance with the needs of fire management and incident command personnel.
  • Coordinate with incident ground personnel to identify, plan, and implement logistical missions.
  • Follow procedures in the NWCG Standards for Aerial Supervision, PMS 505 when incident airspace conflicts and intrusions occur.
  • Notify dispatch center and other incident aircraft of military aircraft eWCG Standards for Aerial Supervision, PMS 505.
  • Manage missing aircraft/aircraft mishap situation according to procedures in the NWCG Standards for Aerial Supervision, PMS 505.
  • Identify and appropriately act on hazardous situations to incident aircraft.
  • Submit accident/incident reports with pertinent forms (SAFECOM, SAFENET, agency-specific forms) through established chain of command.

Document

  • Ensure individual and pilot familiarity with the basic terms of the procurement agreement/contract and payment documents.
  • Complete appropriate payment documents daily.
  • Compile daily statistics and provide to appropriate supervisor.
  • Complete, authorize, ensure timeliness of, and route as required:

Demobilize

  • During transfer of command:
    • Ensure continuity of operations
    • Exchange critical safety information
    • Communicate transfer of authority through established chain of command
  • Plan for demobilization. Brief assigned resources on demobilization procedures and responsibilities. Ensure incident and agency demobilization procedures are followed.
  • Anticipate demobilization, identify excess resources, coordinate with operations to prepare demobilization schedule, and communicate with supervisor.
  • Upon demobilization, report status to home unit including reassignment or estimated time of arrival (ETA) to home unit.

Return to top

USWDS Paragraph Bundles

Please Provide Feedback

Indicates required field

NWCG values your constructive input and we thank you for taking the time to provide feedback.

Although contact information is optional, we hope that you provide a way for us to contact you in case we need clarification on your comment. If you would like to be contacted regarding your feedback, you must provide contact information. 

Would you like a response?
If you would like a response, you must provide contact information (name and email) below.
One file only.
9.28 GB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, mp4, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.
CAPTCHA
Image CAPTCHA
Enter the characters shown in the image.
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
Last Modified / Reviewed:

NWCG Latest Announcements

ETC Equipment Bulletin: 25-003 Flame-Resistant Shirt Survey

Date: June 12, 2025
Questions?  Please contact:
Equipment Technology Committee

The U.S. Forest Service National Technology and Development Program (NTDP) is seeking input on the Forest Service-designed flame-resistant (FR) shirt, currently available through the National Interagency Support Cache system and FedMall.

NTDP is conducting a product review to improve future FR shirt designs. As part of this effort, a short survey is now open for federal employees who have worn any of three recent FR shirt models. Feedback will guide design improvements to better meet the needs of wildland firefighters.

To comply with the Paperwork Reduction Act, responses are limited to federal employees. The survey is open through September 12, 2025. 

References:

NWCG Alerts

ETC Equipment Bulletin: 25-003

NEW! S-130, Firefighter Training (Blended) Now Available

Date: June 10, 2025
If you have questions, please visit our FAQ page. 
If your question is not answered there, you can 
submit your question using our Contact Us form. 
 

The S-130, Firefighter Training (Blended), equips new wildland firefighters with essential skills through a mix of online learning and hands-on training. The course features a required online component and an instructor-led exercise, reinforcing online concepts with practical performance-based training.

The course builds competencies in wildland fire operations, safety, and equipment use, applicable across various operational environments. Both the online component and instructor-led field exercise must be completed to receive a certificate of completion. Students are required to finish the prerequisite S-190, Introduction to Wildland Fire Behavior, before enrolling in S-130, Firefighter Training (Blended).

References:

S-130, Firefighter Training (Blended)

S-190, Introduction to Wildland Fire Behavior

Wildland Fire Learning Portal

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002