Skip to main content

PMS 448

PMS 448

PMS 448

Introduction

COVID-19 Refurb Guidelines

References

All Content

Aviation

Camp

Clothing

Cordura

Fuel Handling

Kits

Medical

Miscellaneous

PPE

Small Engine Equipment

Tools

Water Handling

Deleted Items

Bag – Sleeping, Firefighters, 36 in x 86 in

NFES #
001062
Category
Clothing
Updated
Storage and Shelf Life Checks
Yes
Storage and Shelf Life Procedure
Prior to shipping, inspect carton for rodent damage and/or moisture damage. If found, handle accordingly and dispose of carton and contents in appropriate manner.

Initial Inspection/Disposal Criteria

  1. Inspect for any holes, cuts, tears, abrasions, or torn seams that cannot be repaired economically, if any dispose of.
  2. Inspect for excessive dirt or stains that laundering cannot eliminate, if any dispose of.
  3. Inspect for missing slider, damaged coils, or other defects that make zipper inoperable, repair if economical.
  4. Inspect for batting that is bunched-up or in clumps. Shake the bag several times to ensure that the batting will loft evenly, not clump or shift.
  5. Inspect for any indelible marking on the bag, if any dispose of.
  6. Inspect for any signs of body fluid stains. If there’s any question on whether the bag can be completely cleaned and sanitized, dispose of the item.
  7. Return to stock if item shows no signs of use and passes initial inspection.
  8. Dispose of item if unable to repair.
  9. Refurbish if damage detected is repairable.

Refurbishment Procedures

A. Cleaning- CLASS 4 CORDURA - SLEEPING BAGS

  1. Remove all contents not part of the bag and zip closed before laundering.
  2. Launder bags in front-loading machine. Use mild soap in water of no more than 130 °F. Bags shall undergo three wash and rinse cycles, i.e. wash, rinse, wash, rinse, wash, rinse, sterilize with a bleach solution of 50 ppm in the last wash cycle.
  3. With bag unzipped, dry in a tumble dryer with an average temperature not to exceed 130 °F. The dryer unit shall be of the reverse-action type. All bags shall be unfolded and shall tumble free. (To obtain the average temperature, test the temperature every 5 minutes and average the findings.)
  4. After drying, zip bags closed.

B. Repair

  1. Repair any hole, cut, tear, abrasion, or open seam.
  2. Replace any zipper that has damaged coils and replace any missing slider.

C. Tests for Performance

  1. Inspect cord lock to ensure spring works properly and that the cord passes freely through when the lock is disengaged.
  2. Close zipper to ensure it provides a smooth and secure closure the full length of the bag opening.
  3. Open and close the hook and pile fastener to ensure closure is adequate.
  4. Retest all hardware if it has been replaced.

D. Repackaging

  1. Package in plastic bag.
    • For NFES #000022, #000058, #000128 package 5 bags in NFES #000644 carton (33” x 16” x 22”).
    • For NFES #001062 package 10 bags in NFES #000513 carton (37.50” x 24.50” x 17”).

 

Print PDF

NWCG Latest Announcements

NWCG Equipment Technology Committee Releases Safety Warning: 25-001 Non-specification fire shelters

Date: January 15, 2025
Contact: Equipment Technology Committee

The Equipment Technology Committee (ETC) has released Safety Warning: 25-001 Non-specification fire shelters. Non-specification fire shelters claiming to meet Forest Service (FS) fire shelter specification 5100-606 were first found in February of 2023. As of September 2024, non-specification shelters are again being advertised and sold on the open market.

This Safety Warning outlines details and recommended procedures to purchase FS specification shelters made with materials and components that meet performance criteria and toxicity testing requirements outlined in FS Specification 5100-606. 

For additional information on identifying non-specification shelters, please view ETC Safety Warning 23-01.

References:

ETC Safety Warning 25-001: Non-specification fire shelters

NWCG Equipment Technology Committee

ETC Safety Warning 23-01

Paul Gleason Lead by Example Awards

Date: January 14, 2025
Contact: Leadership Committee

The NWCG Leadership Committee has awarded the 2023 Paul Gleason “Lead By Example” awards to individuals in the categories of Initiative and Innovation, Mentoring and Teamwork, and Motivation and Vision, as well as a Lifetime Achievement Award.

Congratulations to the awardees:

  • Sam Bowen, Superintendent of the Mark Twain Veteran Crew with the U.S. Forest Service.
  • Greg Titus, Zone Fire Management Officer for the St. Marks National Wildlife Refuge with U.S. Fish and Wildlife Service.
  • Renae Crippen, Manager of the Blue Mountain Interagency Dispatch Center with the U.S. Forest Service.
  • Eric Carlson, Instructor with OMNA International.

References:

Paul Gleason Lead by Example Award

Wildland Fire Leadership Development Program

Interview with Paul Gleason

Updated NWCG Standards for Water Scooping Operations, PMS 518

Date: December 19, 2024
Contact: Water Scooper Operations Unit

The NWCG Standards for Water Scooping Operations, PMS 518 establishes the standards for dispatching, utilizing, and coordinating water scooping aircraft on interagency wildland fires. These standards should be used in conjunction with the NWCG Standards for Aerial Supervision (SAS), PMS 505, and any local, state, or geographic/regional water scooping plans.

References:

NWCG Standards for Water Scooping Operations, PMS 518

Updated NWCG Standards for Aerial Supervision, PMS 505

Date: December 19, 2024
Contact: Interagency Aerial Supervision Subcommittee

The Interagency Aerial Supervision Subcommittee has updated the NWCG Standards for Aerial Supervision, PMS 505. PMS 505 establishes standards for aerial supervision operations for national interagency wildland fire operations. 

References:

NWCG Standards for Aerial Supervision, PMS 505