Skip to main content

PMS 448

PMS 448

PMS 448

Introduction

COVID-19 Refurb Guidelines

References

All Content

Aviation

Camp

Clothing

Cordura

Fuel Handling

Kits

Medical

Miscellaneous

PPE

Small Engine Equipment

Tools

Water Handling

Deleted Items

Headlamp – Firefighters (advanced)

NFES #
000667
Category
Miscellaneous
Updated
Storage and Shelf Life Checks
Yes
Storage and Shelf Life Procedure
Headlamps should be stored without batteries.

This item has been deleted from the NFES catalog.  

(Obsolete, replaced by NFES #000718)
National Caches are not stocking or refurbishing this item.

Initial Inspection/Disposal Criteria

  1. Inspect for the following:
    1. Inspect lamp head.
      1. Lamp head should have two bulbs, one in place for use, and one inside the housing as a spare.
      2. The computer chip inside the housing should be intact and firmly in place.
      3. Lens/reflector should be clear, unscratched, and turn on the housing with resistance–if not dispose of.
      4. The housing should be free of cracks and the switch boot free of cracks or tears.
      5. The strap lugs should be intact–if not dispose of.
      6. O-ring should be free of cracks and pliable–if not dispose of and replace.
      7. The wire should be tight and have no cracks.
      8. The connector should be round and clean.
    2. Inspect battery pack.
      1. Housing should free of cracks, both cap lugs and strap lugs should be present and intact.
      2. The cap should be free of cracks, the wire tight and without defect and the O-ring intact. The cap should fit snuggly on the battery housing and lock in place. The connector plate inside the cap should be centered and free of corrosion.
      3. The battery frame should be intact and firmly hold 5 AA batteries.
      4. The electrical connectors should mate with the connectors in the cap.
    3. Inspect helmet strap.
      1. The helmet strap should be without tears, pliable, and hold the headlamp components.
      2. Return to stock if item is in unused/new condition.
  2. There is no refurbishment for this item to return to stock.
  3. Dispose of item if item possesses any defective components or fails any part of initial inspection.

Refurbishing Procedures

A. Cleaning

  • Clean headlamp with clean water.

B. Repair

  • none

C. Testing for performance

  1.  Insert 5 new AA batteries into the battery frame all pointing towards the top.
  2. Insert battery frame into the battery housing.
  3. Tighten the cap; attach the lamp head, the light should go on.
  4. Press and release the lamp button, the light should either brighten or dim.
  5. Press and hold the lamp button, the light should go off.
  6. Remove batteries.

D. Repackaging

  • Package 48 each in NFES #002006 carton (23” x 19” x 10”).

 

Print PDF

NWCG Latest Announcements

2024 Wildland Fire Emergency Medical Service Awards

Date: May 22, 2025
Questions?  Please contact:
Emergency Medical Committee

The NWCG Emergency Medical Committee (EMC) is proud to announce the recipients of the 2024 Wildland Fire Emergency Medical Service Awards. Each year, EMC recognizes individuals and groups who have demonstrated exceptional actions or accomplishments that go above and beyond their normal mission or job duties.

Congratulations to all the awardees and nominees. Through leadership and initiative, they have made significant contributions to the safety and well-being of the wildland fire community. These honors are well deserved.

References:

2024 Wildland Fire EMS Awards

NWCG Emergency Medical Committee

NWCG Welcomes the Incident Management Teams Association as an Associate Member

Date: May 21, 2025
Questions?  Please contact:
https://www.nwcg.gov/contact-us

The NWCG Executive Board is honored to announce that the Incident Management Teams Association (IMTA) has joined the National Wildfire Coordinating Group as an associate member.

IMTA is a dedicated group of incident management professionals committed to enhancing the profession by promoting standards and fostering collaboration across federal, state, local, Tribal, and private sector partners throughout all phases of incident management.

“Joining NWCG aligns with our mission to elevate incident management professionals nationwide,” said Dr. Randal Collins, President of IMTA. “This is a proud moment for all of us committed to advancing public safety.”

References:

Incident Management Teams Association

National Wildfire Coordinating Group

Updated NWCG Guide for Wildland Fire Modules, PMS 431

Date: May 14, 2025
Questions?  Please contact:
Fire Use Subcommittee

The updated NWCG Guide for Wildland Fire Modules, PMS 431 serves as a supplemental resource for wildland fire module operations, providing information frequently used in the field.

PMS 431 defines the organizational structure, staffing, and qualifications for Type 1 and Type 2 Wildland Fire Modules, outlining their roles in wildland fire suppression, prescribed fire, and resource management. The NWCG Guide for Wildland Fire Modules, PMS 431, should be used in conjunction with the NWCG Standards for Wildland Fire Module Operations, PMS 430.

References:

NWCG Guide for Wildland Fire Modules, PMS 431

NWCG Standards for Wildland Fire Module Operations, PMS 430

Updated NWCG Standards for Wildland Fire Resource Typing, PMS 200 Now Includes Off-Highway Vehicle Typing Standards

Date: May 13, 2025
Questions?  Please contact:
Mobile Fire Equipment Subcommittee 

The NWCG Standards for Wildland Fire Resource Typing, PMS 200 has been updated to include newly developed Off-Highway Vehicle (OHV) typing standards. These standards organize OHV information into logical categories and outline key safety requirements for occupants.

NWCG Standards for Wildland Fire Resource Typing, PMS 200 establishes minimum typing standards for aircraft, crews, and equipment used in national mobilization to wildland fire incidents. Typing designations are assigned based on measurable capability and performance criteria.

References:

NWCG Standards for Wildland Fire Resource Typing, PMS 200