Skip to main content

PMS 448

PMS 448

PMS 448

Introduction

COVID-19 Refurb Guidelines

References

All Content

Aviation

Camp

Clothing

Cordura

Fuel Handling

Kits

Medical

Miscellaneous

PPE

Small Engine Equipment

Tools

Water Handling

Deleted Items

Axe – 3-5lb., 26" Straight Handle w/Sheath

NFES #
000383
Category
Tools
Updated
Storage and Shelf Life Checks
None

Initial Inspection/Disposal Criteria

  1. Inspect for obvious damage to head, cutting edges.
  2. Inspect for large chips in blade or cracked head eye.
  3. Inspect for any modifications to head, such as rivets through side of head to hold handle.
  4. Inspect handle for twisted, bent or open grain, if handle has been shortened or is non-standard.
  5. Return to stock if item shows no signs of use and passes visual inspection.
  6.  Refurbish if damage detected in the inspection process is repairable or handle is replaceable.
  7. Dispose of item if unable to repair.

Refurbishing Procedure

A. Cleaning

  1. Wash head and handle.
  2. Wipe dry.

B. Repair

  1. Head
    •  Sharpen tool to specifications according to tool sharpening gauge NFES# 000510.
    • Tools should never be ground to the degree that the metal temperature raises high enough to remove temper, i.e. blue or burned edges.
    • Ensure that blade corners are square.
    • Paint tool head with rust inhibitor (cache option.)
  2. Handle
    • Sand handle if it is rough, chipped, dinged, or has any type of residue that did not come off during sanding.
    • When replacing handle, shape eye for a snug fit. Use high impact plastic or wood-type wedges with appropriate type of epoxy. Metal wedges can be added only in the field as an emergency measure and should not be used during refurbishment.
    • The bottom of the tool head should be within ⅜”--⅝” of the shoulder of the handle.
    • Cut excess off handle make flush with tool head after inserting wedge into handle.
    • Wipe handle with rag and linseed oil.

C. Tests for Performance

  1. On the head check that blades have not been tapered or rounded to the point that tools cannot be sharpened.
  2. On the handle check that it is not twisted, bent or is open-grain.
  3. Grasp the handle of the tool 2- 4” from the end with the head hanging down, but not touching the ground. Using a ball peen or similar hammer give the end of the handle a firm smack. Listen to the sound it makes. If the head is tight and the handle is free of defects, it will make a clear ringing sound. If it is loose or defective you will hear a dull thud, like hitting the end of a 2 x 4.

D. Repackaging

  1. For NFES #000707 install sheath (no NFES).
    • Package 12 each in NFES #000338 carton (37” x 18” x 7”).
  2. For NFES #000352 install leather sheath NFES #000359, package per local cache requirements.
  3. For NFES #000383 install sheath NFES #000815.
    • Suggested packaging is 6 each in NFES #000385 carton (7.25” x 9.25” x 26”).

Print PDF

NWCG Latest Announcements

NWCG Equipment Technology Committee Releases New Equipment Bulletins

Date: September 27, 2024
Contact: Equipment Technology Committee

The Equipment Technology Committee (ETC) has released three new Equipment Bulletins:

  • ETC-EB-24-003 Diesel exhaust fluid (DEF) in fuel containers.
  • ETC-EB-24-004 Two-compartment fuel and oil container (Dolmar) unavailable in the United States (US) and reminders for upkeeping current inventories.
  • ETC-EB-24-005 Personal Protective Equipment (PPE): Inspection, Care, and Maintenance.

These bulletins remind field going personnel of important issues related to equipment for wildland firefighting efforts.

References:

NWCG Alerts

ETC-EB-24-003 Diesel exhaust fluid (DEF) in fuel containers

ETC-EB-24-004 Two-compartment fuel and oil container (Dolmar) unavailable in the United States (US) and reminders for upkeeping current inventories

ETC-EB-24-005 Personal Protective Equipment (PPE): Inspection, Care, and Maintenance

The Experiential Learning Subcommittee is looking for your feedback on Staff Rides

Date: September 20, 2024
Contact: Ashleigh D'Antonio and George Risko, Leadership Committee

The Experiential Learning Subcommittee needs to hear from the field about where the greatest need lies regarding staff rides and their accessibility.

  • Do you have an event you would like to turn into a learning experience?
  • Do you have a staff ride built, but are struggling to implement the delivery?
  • Do you need help building capacity?
  • What other ideas do you have to support experiential leadership training?

Fill out this short survey below to help us help you.

References:

Staff Rides: Feedback

Staff Rides

Updated NWCG Single Resource Casual Hire Information, PMS 934

Date: September 19, 2024
Contact: Incident Business Committee

The Incident Business Committee has updated the NWCG Single Resource Casual Hire Information, PMS 934. This update expands the provisions for hiring emergency personnel.

References:

NWCG Single Resource Casual Hire Information, PMS 934

IBC Memorandum 24-03

NWCG 2024 Spring/Summer Highlights

Date: September 13, 2024

Image
Forest Service Logo
Image
Bureau of Indian Affairs Logo
Image
Bureau of Land Management Logo
Image
National Park Service Logo
Image
Fish & Wildlife Service Logo
Image
State Foresters Logo
Image
U.S. Fire Administration
Image
Intertribal Timber Council Logo
Image
International Association of Fire Chiefs
Image
Department of Defense Logo

Welcome to our latest highlights from the National Wildfire Coordinating Group, where we explore the latest updates, insights, and efforts that develop interoperable wildland fire operations among federal, state, local, Tribal, and territorial partners.

The Performance Support Package, which for ABRO includes the Incident Position Standards and Next Generation Position Task Book were developed through the Incident Performance and Training Modernization (IPTM) effort. The Performance Support Package will support trainees, those qualified in the position, and evaluators.
 

Image
NASA Logo

NASA JOINS NWCG!

The National Aeronautics and Space Administration (NASA) is officially an associate member of NWCG. As such, NASA is beginning to collaborate with wildland fire management agencies with the goal of increasing collaboration across agencies and leveraging NASA data, technology, and innovation for nation-wide efforts in wildland fire management. NASA has a rich history of research, development, and technology transfer in the areas of Earth science, space technologies, and aeronautics that support the NWCG mission.

Image
NWCG new website look.

WWW.NWCG.GOV HAS A NEW LOOK AND DESIGN

The NWCG web team dedicated the past two years to making a significant upgrade to the www.nwcg.gov site. This upgrade involved a comprehensive redesign of over 7,700 web pages.

The modernization of NWCG’s website involved migrating to Drupal 10, a cutting—edge content management system, and leveraging Amazon Web Service GovCloud for secure and efficient hosting. These upgrades help ensure that the NWCG website remains current in content management practices, offering enhanced customization, improved performance, and an overall superior user experience.

NWCG Leadership Committee

Image
WFLDP Professional Reading Program logo
Image
WFLDP PRP book covers

The Wildland Fire Leadership Development Program announced the Professional Reading Program’s 2024 list!

The years books include:

  • Young Men and Fire by Norman Maclean
  • The Wisdom of the Bullfrog by William H. McRaven
  • The Art of Clear Thinking by Hasard Lee
  • Emotional Agility by Susan David
  • Writing to Persuade by Trish Hall

Learn more at the NWCG Leadership Committee

INCIDENT PERFORMANCE AND TRAINING MODERNIZATION

In 2023, NWCG kicked off the Incident Performance and Training Modernization (IPTM) effort. A training system overhaul focused on developing a performance-based training system designed to shift training to on-the-job when appropriate.

Over the next five years, NWCG intends to analyze all positions within the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1. To date we are currently working on 30 incident positions, and planning for 20+ in calendar year 2025.

Subject Matter Experts from a variety of geographical areas and agencies recently completed the position analysis for 16 positions. From this analysis, Incident Positions Standards and a Next Generation Position Task Book will be developed for each position.

Image
Incident Performance and Training Modernization

NEXT GENERATION POSITION TASK BOOK

In April 2024, NWCG launched the new Next Generation Position Task Book (Next Gen PTB) which is a key component of the IPTM effort. This revised evaluation tool is designed to work in conjunction with the newly developed Incident Position Standards.

Major Next Gen PTB changes:

  • Structured to improve constructive conversations between evaluators and trainees.
  • Reference new Incident Position Standards.
  • Include only tasks required to be evaluated for successful performance.
  • Trainees will be rated on their performance vs. initialing whether a task was completed.
  • Must include written feedback when trainee does not meet the standard.
  • Will be position specific (no combined PTBs).
Image
Screen shot of the Next Gen Position Task Book
Image
Banner image of the Wildland Fire Learning Portal website

NWCG’s training course catalog is now available on the Wildland Fire Learning Portal (WFLP).

To access the training course catalog, visit WFLP and either set up an account or login as a guest.