Skip to main content

NWCG Leadership Curriculum Providers and Lead Instructors

LC header graphic. Decorative.

L-380 Fireline Leadership

Adaptive Training Options (Approved 2013)

  • Frank Norbury (2013)
  • Kevin Harvell (2023)

Mission-Centered Solutions (Approved 2000)

  • Dayton Baraw (2001)
  • Mike Carroll (2001)
  • Tony DeMasters (2023)
  • Eric Hill (2009)
  • Mike Kancir (2017)
  • John Lee (2000)
  • Gary Luck (2022)
  • Lark McDonald (2000)
  • Jon Ridolfo (2011)
  • Steve Rosta (2011)
  • Andrew Sidwell (2017)
  • Mark T. Smith (2000)
  • Paul Smith (2019)

National Outdoor Leadership School (Approved 2005)

  • Lisa Bauer (2012)
  • Allison Bergh (2010)
  • Chris Bruno (2012)
  • Jesse Burns (2010)
  • Scott Christy (2005)
  • Jim Culver (2006)
  • Andy Dennis (2013)
  • Darcy Deutscher (2008)
  • Jake Freed (2010)
  • Ryland Gardner (2011)
  • Tim Hendricks (2010)
  • Kate Koons (2010)
  • Marcio Paes-Barretto (2010)
  • Kathleen Pelto (2012)
  • Dave Piggott (2010)
  • Jesse Quillian (2014)
  • Rick Rochelle (2010)
  • Shannon Rochelle (2008)
  • Ann Schorling (2013)
  • Jaret Slipp (2013)
  • Linnea (PeeBee) van den Toorn (2014)
  • Darren Wells (2005)
  • Ashley Wise (2013)

Pacific Northwest Training Center (Approved 2004)

  • Maria Agnew (2012)
  • Jay Bertek (2012)
  • LJ Brown (2011)
  • Bill Miller (2005)
  • Rowdy Muir (2005)
  • Frank Norbury (2004)
  • Brian Sebastian (2022)

Government Agency (Approved 2015)

  • Jake Akerberg (2017)
  • LJ Brown (2015)
  • Danny Bryant (2015)
  • Paul Hohn (2018)
  • Josh Mathisen (2015)
  • Rowdy Muir (2015)
  • Jim Tomaselli (2015)

L-381 Incident Leadership

Adaptive Training Options (Approved 2014)

  • Frank Norbury (2014)

Mission-Centered Solutions (Approved 2003)

  • Dayton Baraw (2003)
  • Eric Hill (2010)
  • Mike Kancir (2022)
  • Gary Luck (2009)
  • Mark T. Smith (2003)

Pacific Northwest Training Center (Approved 2011)

  • Jake Akerberg (2019)
  • Frank Norbury (2013)

L-480 Organizational Leadership

Benchmark Research; Safety, Inc. (Approved 2009)

  • Curt Braun, Ph.D. (2009)

Guidance Group (Approved 2013)

  • Mike DeGrosky (Approved 2013)

The Institute for Advanced Development (2005)

  • Larry Iverson, Ph.D. (2005)

ProHealthNet Incorporated(Approved 2009)

  • Doug Booster (2009)

L-481 Advanced Leadership for Command; General Staff

Mission-Centered Solutions (Approved 2015)

  • Dayton Baraw (2023)
  • John Lee (2016)
  • Lark McDonald (2015)
  • Mark T. Smith (2015)

Contact Information

Website HyperlinkPhone Number
Adaptive Training Options208-484-5482
The Institute for Advanced Development206-772-8989
Mission Centered Solutions303-646-3700 or 866-527-5627
National Outdoor Leadership School307-332-5300 or 800-710-6657
ProHealthNet Incorporated541-389-9197

 

 

 

NWCG Latest Announcements

ETC Equipment Bulletin: 25-003 Flame-Resistant Shirt Survey

Date: June 12, 2025
Questions?  Please contact:
Equipment Technology Committee

The U.S. Forest Service National Technology and Development Program (NTDP) is seeking input on the Forest Service-designed flame-resistant (FR) shirt, currently available through the National Interagency Support Cache system and FedMall.

NTDP is conducting a product review to improve future FR shirt designs. As part of this effort, a short survey is now open for federal employees who have worn any of three recent FR shirt models. Feedback will guide design improvements to better meet the needs of wildland firefighters.

To comply with the Paperwork Reduction Act, responses are limited to federal employees. The survey is open through September 12, 2025. 

References:

NWCG Alerts

ETC Equipment Bulletin: 25-003

NEW! S-130, Firefighter Training (Blended) Now Available

Date: June 10, 2025
If you have questions, please visit our FAQ page. 
If your question is not answered there, you can 
submit your question using our Contact Us form. 
 

The S-130, Firefighter Training (Blended), equips new wildland firefighters with essential skills through a mix of online learning and hands-on training. The course features a required online component and an instructor-led exercise, reinforcing online concepts with practical performance-based training.

The course builds competencies in wildland fire operations, safety, and equipment use, applicable across various operational environments. Both the online component and instructor-led field exercise must be completed to receive a certificate of completion. Students are required to finish the prerequisite S-190, Introduction to Wildland Fire Behavior, before enrolling in S-130, Firefighter Training (Blended).

References:

S-130, Firefighter Training (Blended)

S-190, Introduction to Wildland Fire Behavior

Wildland Fire Learning Portal

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002