Skip to main content

Helicopter Manager, Single Resource

HMGB decorative banner: photos depicting HMGB position. HMGB Position Description: A Single Resource Boss (HMGB) is responsible for supervising and directing a fire suppression module, such as a hand crew, engine, helicopter, heavy equipment, firing team, or one or more fallers.

The Helicopter Manager, (HMGB), provides supervision and coordination of helicopter module operations. The HMGB supervises assigned crewmembers and reports to a Helibase Manager (HEBM), Air Support Group Supervisor (ASGS), Incident Commander (IC), or other assigned supervisor. The HMGB works in the Air Operations functional area.

USWDS Paragraphs

Operations Section Chief (OPS3) Operations Branch Director (OPBD) Structure Protection Specialist (STPS) Division/Group Supervisor (DIVS) Task Force Leader (TFLD) Crew Boss, Single Resource (CRWB) Heavy Equipment Boss, Single Resource (HEQB) Engine Boss, Single Resource (ENGB) Felling Boss, Single Resource (FELB) Firing Boss, Single Resource (FIRB) Helicopter Manager, Single Resource (HMGB) Operations Section Chief (OSC2) Staging Area Manager (STAM) Air Operations Branch Director (AOBD) Air Support Group Supervisor (ASGS) Helibase Manager (HEBM) Deck Coordinator (DECK) Aircraft Base Radio Operator (ABRO) Helicopter Crew Member (HECM) Air Tactical Group Supervisor (ATGS) Helicopter Coordinator (HLCO) Firefighter Type 1 (FFT1) Firefighter Type 2 (FFT2) Strike Team Leader Crew (STCR) Strike Team Leader Heavy Equipment (STEQ) Strike Team Leader Engine (STEN) Operations Section Chief (OSC1) Advanced Faller (FAL1) Intermediate Faller (FAL2) Basic Faller (FAL3) Fixed Wing Base Manager (FWBM) Airtanker Base Manager (ATBM) Fixed Wing Parking Tender (FWPT) Mixmaster (MXMS) Retardant Crew Member (RTCM) Single Engine Air Tanker Manager (SEMG) Aircraft Time Keeper (ATIM) Ramp Manager (RAMP) Operations Section Chief (OSCC) Crew Representative (CREP)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Forest Service and Department of Interior are enabled by Administratively Determined Pay Plans (AD Pay Plans) to hire persons for temporary duration for the following reasons:

  1. To cope with a sudden and unexpected emergency caused by a fire, or extreme fire potential, flood, storm, or any other all-hazard emergency that threatens damage to federally protected property, has the potential to cause loss of life, serious injury, public health risk, or damage to natural or cultural resources unless brought under immediate control.
  2. To provide emergency assistance to States under formalized agreements.
  3. To meet mission assignments issued by the Federal Emergency Management Agency (FEMA).

The National Wildfire Coordinating Group (NWCG) Incident Business Committee (IBC) reviews positions annually and establishes pay rate classifications for each position.

For more information on the AD Pay Plans, visit Incident Business Committee.

Date: Jun 2022

Added: Incident Position Description (IPD) approved.

Date: Oct 2019

Removed: Single Engine Airtanker Manager (SEMG) from "HMGB Maintains Currency for These Positions."

Date: Oct 2018

Updated: Changed Helibase Manager Type 1 and Helibase Manager Type 2 to Helibase Manager (HEBM).

Date: Oct 2012

Added: A-110, Aviation Transportation of Hazardous Materials training as a triennial requirement. Completion of A-110 is required prior to Position Task Book initiation. A-110 training is available at https://www.iat.gov/training/searchcourse_overview.asp?cid=1005.

Date: May 2008

Position created.

The Helicopter Boss, Single Resource (HELB) and Helicopter Manager (HELM) positions have been combined and replaced by the position of Helicopter Manager, Single resource (HMGB). This position is included in the Single Resource Boss Position Task Book (311-13).

USWDS Paragraph Bundles

Primary Committee: National Interagency Aviation Committee
Steward: Interagency Helicopter Operations Subcommittee


Last Modified / Reviewed:

Please Provide Feedback

Indicates required field

NWCG values your constructive input and we thank you for taking the time to provide feedback.

Although contact information is optional, we hope that you provide a way for us to contact you in case we need clarification on your comment. If you would like to be contacted regarding your feedback, you must provide contact information. 

Would you like a response?
If you would like a response, you must provide contact information (name and email) below.
One file only.
9.28 GB limit.
Allowed types: gif, jpg, jpeg, png, bmp, eps, tif, pict, psd, txt, rtf, html, odf, pdf, doc, docx, ppt, pptx, xls, xlsx, xml, avi, mov, mp3, mp4, ogg, wav, bz2, dmg, gz, jar, rar, sit, svg, tar, zip.
CAPTCHA
Image CAPTCHA
Enter the characters shown in the image.
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

NWCG Latest Announcements

ETC Equipment Bulletin: 25-003 Flame-Resistant Shirt Survey

Date: June 12, 2025
Questions?  Please contact:
Equipment Technology Committee

The U.S. Forest Service National Technology and Development Program (NTDP) is seeking input on the Forest Service-designed flame-resistant (FR) shirt, currently available through the National Interagency Support Cache system and FedMall.

NTDP is conducting a product review to improve future FR shirt designs. As part of this effort, a short survey is now open for federal employees who have worn any of three recent FR shirt models. Feedback will guide design improvements to better meet the needs of wildland firefighters.

To comply with the Paperwork Reduction Act, responses are limited to federal employees. The survey is open through September 12, 2025. 

References:

NWCG Alerts

ETC Equipment Bulletin: 25-003

NEW! S-130, Firefighter Training (Blended) Now Available

Date: June 10, 2025
If you have questions, please visit our FAQ page. 
If your question is not answered there, you can 
submit your question using our Contact Us form. 
 

The S-130, Firefighter Training (Blended), equips new wildland firefighters with essential skills through a mix of online learning and hands-on training. The course features a required online component and an instructor-led exercise, reinforcing online concepts with practical performance-based training.

The course builds competencies in wildland fire operations, safety, and equipment use, applicable across various operational environments. Both the online component and instructor-led field exercise must be completed to receive a certificate of completion. Students are required to finish the prerequisite S-190, Introduction to Wildland Fire Behavior, before enrolling in S-130, Firefighter Training (Blended).

References:

S-130, Firefighter Training (Blended)

S-190, Introduction to Wildland Fire Behavior

Wildland Fire Learning Portal

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002