Skip to main content

Incident Action Plan (IAP) Map

Note: The Situation Map has been deprecated as a map standard. The Operations map should be used as an acceptable substitute for task book purposes.

Product Description

The Incident Action Plan (IAP) map is the primary map used by field operations personnel and it is an essential tool for firefighter safety. The IAP map effectively communicates incident management objectives in addition to geographic and incident features.

The IAP map is used by operations staff to display field assignments, crew instructions, and division safety concerns at operational briefings and breakout meetings. IAP maps are typically at 1:24,000 scale and either printed small enough to be carried into the field or produced digitally for use on a mobile device. An incident may fit on one page or tiled across multiple pages (Multi-Page IAP Map).

The IAP map is a component of the Incident Action Plan.

Target Audience

Incident field personnel.

Guidelines

Apply for digital or hard copy maps.

  • Standard Incident Command System (ICS) symbology.
  • Letter (8½” x 11”) or tabloid (11”x 17”) size.
  • Mapped area should cover the incident area and predicted spread.
  • Generally 1:24,000 scale; 1:63,360 scale in Alaska (Situation Unit Leader (SITL) may direct other scales).

Standard Elements

All map products produced should include the STANDL-SGD cartographic elements and an index page for multi-page products.

Data

  • Wildfire Daily Fire Perimeter (Polygon) with Contained and Uncontained Perimeter Lines.
  • Event Lines (including, but not limited to: Planned and Completed lines, Access Routes, Escape Routes).
  • Event Points (including, but not limited to: Camps, Dip Sites, Draft Sites, Drop Points, Hazards, Helispots, Helibase, Incident Command Post, and Safety Zones).
  • Assignment (Division, Branch, Zone) breaks and labels.
  • Land Ownership / Jurisdiction.
  • Special Management Areas (including, but not limited to: Wilderness, Wilderness Study Areas, Inventoried Roadless Areas).
  • Structures.
  • Utilities (including, but not limited to: Powerlines, Substations, Pipelines).
  • Topographic Base.
  • Other Situation Unit Leader (SITL)-requested data. 

Examples

These are examples from actual incidents and may include non-standard elements.

Also note that examples use the standard symbols at the time of their creation and may not reflect the current GeoOps symbology.

Map elements, incident features, and composition remain consistent across these visual changes.

  1. 2022 Dodge Springs Fire
  2. 2010 Wrangler Fire
  3. 2015 Sucker Creek Fire
  4. 2016 Buffalo Fire (a non-suppression fire)
  5. 2017 Sunrise Fire (Multi-Page IAP)
  6. 2016 Beaver Creek Fire (Multi-Page IAP)
  7. 2017 Burro Fire (Multi-Page IAP)

 

Last Modified / Reviewed:

Print PDF

NWCG Latest Announcements

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002

2024 Wildland Fire Emergency Medical Service Awards

Date: May 22, 2025
Questions?  Please contact:
Emergency Medical Committee

The NWCG Emergency Medical Committee (EMC) is proud to announce the recipients of the 2024 Wildland Fire Emergency Medical Service Awards. Each year, EMC recognizes individuals and groups who have demonstrated exceptional actions or accomplishments that go above and beyond their normal mission or job duties.

Congratulations to all the awardees and nominees. Through leadership and initiative, they have made significant contributions to the safety and well-being of the wildland fire community. These honors are well deserved.

References:

2024 Wildland Fire EMS Awards

NWCG Emergency Medical Committee

NWCG Welcomes the Incident Management Teams Association as an Associate Member

Date: May 21, 2025
Questions?  Please contact:
https://www.nwcg.gov/contact-us

The NWCG Executive Board is honored to announce that the Incident Management Teams Association (IMTA) has joined the National Wildfire Coordinating Group as an associate member.

IMTA is a dedicated group of incident management professionals committed to enhancing the profession by promoting standards and fostering collaboration across federal, state, local, Tribal, and private sector partners throughout all phases of incident management.

“Joining NWCG aligns with our mission to elevate incident management professionals nationwide,” said Dr. Randal Collins, President of IMTA. “This is a proud moment for all of us committed to advancing public safety.”

References:

Incident Management Teams Association

National Wildfire Coordinating Group