Skip to main content

Symbology

Purpose

Standard symbols in mapping wildland fires facilitates fast and consistent interpretation of mapping products and helps prevent ambiguous map interpretation, which can become a safety issue during an incident. In the interest of encouraging safety, consistency, and readability, GeoOps describes the symbols that should be used when creating maps.​

Specifications

The following applies:

  • Symbols should be identifiable and clearly distinguishable from other Incident Command System (ICS) symbols, whether displayed in color or black and white.
  • Common map conventions (e.g., blue for hydrologic features) should be observed, if possible, to ensure clear communication.
  • National symbology standards should be used where appropriate. See references below.
  • Choice of symbol size is at the discretion of the Geographic Information System Specialist (GISS) and the Situation Unit Leader (SITL)​.
  • Latitude/Longitude information is displayed in degrees, decimal minutes, WGS 84 datum.
  • The Point Feature symbology specifications table should be referenced for label requirements.
  • The Label attribute is typically used to dynamically label all Point features, with the exception of Division, Branch, and Zone Breaks.  Dynamic labels can also be used for Line or Polygon features when needed (e.g., Management Action Points).  All labels, if turned on, will label on the Label field in the attribute table by default.
  • Division, Branch, and Zone labels should be placed between assignment breaks, using the Label Point Feature Layer.
  • Secondary symbols are derived from the same data as the primary symbols and used in conjunction with them.  For example, Repair Status is an attribute on Accountable Property, Event Point, and Event Line. The Repair Status Service is a view of the same data but symbolized on the Repair Status attributes. When displayed in conjunction with the primary layers, it visualizes the Feature Type and Repair Status to the end user.

References

Responsibilities

The SITL ensures that standard map symbology is used for mapping wildland fire incidents. The GISS uses the standard GIS map symbology and, if applicable, standard map symbol colors but may adapt (e.g., enlarge, use halo) the symbology for map readability while maintaining the essential design of the standard symbols.

 

Last Modified / Reviewed:

Print PDF

NWCG Latest Announcements

Updated NWCG Guide for Wildland Fire Modules, PMS 431

Date: May 14, 2025
Questions?  Please contact:
Fire Use Subcommittee

The updated NWCG Guide for Wildland Fire Modules, PMS 431 serves as a supplemental resource for wildland fire module operations, providing information frequently used in the field.

PMS 431 defines the organizational structure, staffing, and qualifications for Type 1 and Type 2 Wildland Fire Modules, outlining their roles in wildland fire suppression, prescribed fire, and resource management. The NWCG Guide for Wildland Fire Modules, PMS 431, should be used in conjunction with the NWCG Standards for Wildland Fire Module Operations, PMS 430.

References:

NWCG Guide for Wildland Fire Modules, PMS 431

NWCG Standards for Wildland Fire Module Operations, PMS 430

Updated NWCG Standards for Wildland Fire Resource Typing, PMS 200 Now Includes Off-Highway Vehicle Typing Standards

Date: May 13, 2025
Questions?  Please contact:
Mobile Fire Equipment Subcommittee 

The NWCG Standards for Wildland Fire Resource Typing, PMS 200 has been updated to include newly developed Off-Highway Vehicle (OHV) typing standards. These standards organize OHV information into logical categories and outline key safety requirements for occupants.

NWCG Standards for Wildland Fire Resource Typing, PMS 200 establishes minimum typing standards for aircraft, crews, and equipment used in national mobilization to wildland fire incidents. Typing designations are assigned based on measurable capability and performance criteria.

References:

NWCG Standards for Wildland Fire Resource Typing, PMS 200

NEW! S-204, Interpersonal and Critical Thinking Skills for Safety Officers Now Available

Date: May 12, 2025
Questions?  Please contact:
Risk Management Committee

The S-204, Interpersonal and Critical Thinking Skills for Safety Officers self-directed online course is now available! Developed through the Incident Performance and Training Modernization (IPTM) effort, this training supports individuals working towards Safety Officer, Field (SOFF) incident qualifications.

S-204, Interpersonal and Critical Thinking Skills for Safety Officers focuses on facilitating hazard mitigation conversations and building trust to influence safety-related decisions. Individuals can self-enroll through the Wildland Fire Learning Portal (WFLP).

Any changes to qualification pathways will take effect with the next update of the NWCG Standards for Wildland Fire Position Qualifications, PMS 310-1.

References:

S-204, Interpersonal and Critical Thinking Skills for Safety Officers 

NWCG Safety Officer, Field (SOFF) Position Page

Wildland Fire Learning Portal

Great Basin Cache Upgrading to New Inventory System

Date: May 7, 2025
Questions?  Please contact:
Great Basin Cache
Phone: (208) 387-5104
Fax: (208) 387-5573

The Great Basin Cache (GBK) is transitioning to a new inventory system to better serve the wildland fire community. During this upgrade, GBK will be unable to process standard orders from Part 1: Fire Supplies and Equipment and Part 2: Publications between May 8-20, 2025, with exceptions made for emergency fire orders. Orders will be accepted through close of business May 7.

To browse the latest available items, please refer to the National Fire Equipment System (NFES) catalogs. 

References:

NWCG NFES Catalog-Part 1: Fire Supplies and Equipment, PMS 449-1

NWCG NFES Catalog-Part 2: Publications, PMS 449-2