Skip to main content

3.1 Volume or Capacity

Volume is used to indicate the capacity of a tank or container. It is used by firefighters to answer questions like "How much water is left in the tank?" and "At 15 gallons per minute (gpm), how many more minutes before the tank is empty?" 

VOLUME OF A RECTANGULAR OBJECT

The volume of a rectangular container is determined by multiplying the length (l) by the width (w) by the height (h).

volume

Volume = length × width × height
V = l × w × h

Example 1 - Determine the volume of the tank in gallons.

Example 1 Image

Step 1. Use the equation for determining the volume of a rectangle. V = l × w × h

Step 2. Identify the length, width, and height. l = 5 ft, w = 6 ft, h = 8 ft

Step 3. Set up the problem and solve. V = 5ft × 6ft × 8ft = (5 × 6 × 8) (ft × ft × ft) = 240 ft3

Step 4. Determine the appropriate conversion factor. 1 cubic foot = 7.4805 gallons

Step 5. Set up the cancellation table so all units will cancel except gallons (see Section 2.1).

Cancellation Table

The volume of the tank of water is 240 cubic feet or 1,795 gallons.

Example 2 - The water tank on a newly designed engine is 34 inches wide, 5 feet high, and 12 feet long. What is the capacity of the water tank in cubic feet? In gallons?

Example 2 image

Step 1. Use the equation for determining the volume of a rectangle. V = l × w × h

Step 2. Identify the length, width, and height. l = 12 ft, w = 34 in, h = 5 ft

Step 3. Convert all the measurements to the same units, feet.

Inches to Feet
Step 4. Set up the problem, and solve for volume. V = 2.83 ft × 5 ft × 12 ft = 170 ft3

Step 5. Set up the cancellation table so all units will cancel, except the desired unit, gallons.

Ft3 to Gallons

The volume of the tank is 170 cubic feet or 1272 gallons.

VOLUME OF A CYLINDER

The volume of a cylinder is found by multiplying the area of the base times the height, h. The base of a cylinder is a circle, A = π × r2, where π = 3.14. 

Volume Example

Example 3 - A cylindrical tank of foam concentrate is 5 feet tall. The tank diameter is 2.5 feet. What is the capacity, in gallons, of the tank?

Step 1. Use the equation for determining the volume of a cylinder.
V = π r2 × h

Step 2. Draw a sketch. Label the height and diameter.

Height and Diameter

π = 3.14, r = 1/2 d = 1/2 × 2.5 ft = 1.25 ft, h = 5 ft

Step 3. Set up the problem and solve. V = 3.14 × (1.25 ft)2 × 5 ft = 24.5 ft3

Step 4. Set up the cancellation table so all units will cancel, except the desired unit, gallons.

Ft3 to Gallons

The tank capacity is 183.3 gallons.

 

NWCG Latest Announcements

Updated NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

Date: April 23, 2025
Questions?  Please contact:
Interagency Fire Unmanned Aircraft Systems Subcommittee

The NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515 standardizes processes and procedures for the interagency use of Unmanned Aircraft Systems (UAS), including pilot inspections and approvals. This updated publication provides the aviation community with standards to ensure UAS are used safely, effectively, and efficiently in support of fire management goals and objectives.

References:

NWCG Standards for Fire Unmanned Aircraft Systems Operations, PMS 515

NWCG National Interagency Aviation Committee

ETC Bulletin 25-001: Retrofitted Hot/Cold Beverage Kits - 2025 Field Season

Date: April 16, 2025
Questions?  Please contact:
Equipment Technology Committee

Due to spout failures and the associated risk of burn injuries, manufacturers have retrofitted the Hot/Cold Beverage Kits using a heat-shrinking band to secure the black spout at the insertion site. The updated kits feature a fluorescent label on each full kit assembly for easy identification. Catering units are encouraged to confirm the clear heat-shrinking bands are intact around each spout before filling.

ETC Bulletin 24-001 regarding Hot/Cold Beverage Kits has been archived and replaced by ETC Bulletin 25-001 for the 2025 season.

References:

NWCG Alerts

ETC-EB-25-001 Retrofitted Hot/Cold Beverage Kits

NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and Next Generation Position Task Book for Basic Faller Are Now Available

Date: April 14, 2025
Questions?  Please contact:
Hazard Tree and Tree Felling Subcommittee

The updated NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212, and NWCG Position Task Book for Basic Faller (FAL3), PMS 311-19 are now available.

The NWCG Standards for Wildland Fire Chainsaw Operations, PMS 212 includes position standards designed to be used in conjunction with the Next Generation Position Task Book (Next Gen PTB). The Next Gen PTB for Basic Faller (FAL3) includes an evaluation guide with suggested rating elements to consider when assessing trainees.

References:

NWCG Standards For Wildland Fire Chainsaw Operations, PMS 212

NWCG Position Task Book for Basic Faller (FAL3), PMS 311-119

NWCG Basic Faller (FAL3)

RMC Memo 25-01: Summary of Updates to Safety Officer Positions

Date: April 9, 2025
Questions?  Please contact:
RMC Member Eric Fransted

The Risk Management Committee (RMC) serves as the position steward for all Safety Officer incident positions and continues to improve position standards, training, and naming conventions. The implementation of Complex Incident Management (CIM) required changes to position titles. RMC collaborated with the NWCG Incident Position Standards Committee (IPSC) to propose and implement these updates. 

References:

RMC Memo 25-01: Summary of Updates to Safety Officer Positions 

NWCG Position Catalog