Skip to main content

Create Incident Maps and Digital Products

GISS Workflow Diagram: Create Incident Maps and Digital Products

Create Incident Maps and Digital Products – Repeat as Necessary

  1. Create or Update Incident Map(s).
    1. Use an existing Master Project or open the Pro Project Template and Save As to create a new Master Project per GeoOps.
    2. Repair path of Event layer file(s)  to point to the Master Incident GDB.
    3. Add base maps and ancillary datasets to map.
    4. Create a layout or make a copy of a provided layout template for the desired map product.
    5. Apply definition queries to display only the Event Features appropriate for the intended map audience.
    6. Use dynamic labeling where applicable and create annotation as necessary.
    7. Ensure all essential map elements are present and correct (STANDL SGD).
    8. Export Geospatial PDF map per GeoOps standards.
  2. Create and share public web products.

GIS Workflow, explained below

Figure 1.Create Incident Maps and Digital Products
(click image to open larger)

 

General Map Guidelines

The maps presented in this section are not all-inclusive, only maps that have specific processes or analysis are listed. The most common maps requested of a GISS are listed in the NWCG Standards for Geospatial Operations (GeoOps), PMS 936, Map Product Standards Section. For uncommon products, the desired elements are typically provided by the person requesting the map through the Situation Unit Leader (SITL). If not, the GISS should request additional guidance.

Other Procedural considerations include:

  • The SITL (or equivalent) decides which maps to produce and approves final versions.
  • The SITL directs the use of logos.
  • Placement of fire acreage (and total acreage reported) on maps is at the discretion of the SITL.
  • The GISS should consider the page size and whether color is needed; many maps may need specific formatting and may be reproduced on black and white copy machines.
  • The GISS schedules map production to meet specific deadlines.
  • North arrow may need to be rotated to indicate true north correctly.
  • Drafts: Maps that are for review only may include “DRAFT.”
  • Sensitive information: Maps may need labels defining the sensitivity of the data (e.g., For Official Use Only, Not for Public Distribution or Use).
  • Disclaimers: Maps may include disclaimers if requested or required under delegated authority (e.g., For Reference Only).
  • Proprietary information: Maps should cite the source for any proprietary information.

Responsibilities

Timelines for map production are established with the SITL, Planning Section Chief (PSC), or the assigned supervisor. The GISS generates all products on time for scheduled briefings and other meetings. Map definitions should be used as general guidelines; the SITL or PSC has the authority to deviate from the standards

Communications

All incident map requests are channeled through the SITL or PSC so they are kept informed of the GISS workload and can help prioritize needs. The SITL or PSC may instruct the GISS to work with the end-user of the map to clarify map product requirements. Final map products are approved by the SITL or PSC (or assigned supervisor) before release, unless otherwise arranged.

Job Aids

 

˂˂ Previous Step
 
Next Step >>
 

Last Modified / Reviewed:

Print PDF

NWCG Latest Announcements

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

Date: June 3, 2025
Questions?  Please contact:
Emergency Medical Committee

The Emergency Medical Committee has issued interim guidance for Rapid Extraction Module Support (REMS) teams. Until further notice, Type I and II REMS teams must designate a team leader qualified at Firefighter Type 1 Squad Boss (FFT1) or higher. This temporary change replaces the Single Resource Boss (SRB) requirement, which is currently not feasible due to administrative barriers.

This memorandum does not include any other changes to the NWCG Standards for Rapid Extraction Module Support, PMS 552. This interim change takes effect immediately and will remain in place until further notice.

References:

EMC Memo 25-001: Interim Rapid Extraction Module (REMS) Training and Qualification Requirements

NWCG Standards for Rapid Extraction Module Support, PMS 552

Equipment Bulletin 25-002: Chaps, Chain Saw, M-2020, Nonconformities Affecting Use, Appearance, and Serviceability

Date: June 2, 2025
Questions?  Please contact:
Equipment Technology Committee

The Equipment Technology Committee issued Equipment Bulletin: 25-002 to address a manufacturing nonconformity affecting Forest Service specification, 6170-4K Chain Saw Chaps. The issue applies to chaps manufactured in 2024 and 2025 and distributed through FedMall. These chaps may have incorrectly bound edges that expose inner protective layers.

Independent purchasers should inspect all chain saw chaps received from FedMall beginning in 2024, prior to use. Review the full Equipment Bulletin: 25-002 for inspection criteria and recommended actions.

References:

NWCG Alerts

ETC Equipment Bulletin: 25-002

2024 Wildland Fire Emergency Medical Service Awards

Date: May 22, 2025
Questions?  Please contact:
Emergency Medical Committee

The NWCG Emergency Medical Committee (EMC) is proud to announce the recipients of the 2024 Wildland Fire Emergency Medical Service Awards. Each year, EMC recognizes individuals and groups who have demonstrated exceptional actions or accomplishments that go above and beyond their normal mission or job duties.

Congratulations to all the awardees and nominees. Through leadership and initiative, they have made significant contributions to the safety and well-being of the wildland fire community. These honors are well deserved.

References:

2024 Wildland Fire EMS Awards

NWCG Emergency Medical Committee

NWCG Welcomes the Incident Management Teams Association as an Associate Member

Date: May 21, 2025
Questions?  Please contact:
https://www.nwcg.gov/contact-us

The NWCG Executive Board is honored to announce that the Incident Management Teams Association (IMTA) has joined the National Wildfire Coordinating Group as an associate member.

IMTA is a dedicated group of incident management professionals committed to enhancing the profession by promoting standards and fostering collaboration across federal, state, local, Tribal, and private sector partners throughout all phases of incident management.

“Joining NWCG aligns with our mission to elevate incident management professionals nationwide,” said Dr. Randal Collins, President of IMTA. “This is a proud moment for all of us committed to advancing public safety.”

References:

Incident Management Teams Association

National Wildfire Coordinating Group